Open Access Open Access  Restricted Access Subscription or Fee Access

A Review on Applications of Lean Manufacturing Principles

Kishan H. Joshi, Bhavesh A Sonagra, Heena M. Gami, Hiren G. Padhiyar

Abstract


This paper has been written for analyzing the policy of the lean manufacturing and identifying its scope by waste reduction techniques. Various concepts of lean manufacturing are analyzed to explore the manufacturing process. Various articles are studied to explore the use of lean principles and techniques to identify the waste. In these literature studies, some of the authors have focused on value stream mapping for analyzing the system, and many of researches have utilized maintenance activities, some authors have also considered the risk associated with implementation of lean principles. This study can be useful for developing economy in manufacturing by implementing lean policy for waste reduction and quality improvement.


Full Text:

PDF

References


Andrés-López E, González-Requena I, Sanz-Lobera A. Lean Service: Reassessment of Lean Manufacturing for Service Activities. Procedia Eng. 2015; 132: 23–30p.

Wahab Amelia Natasya Abdul, Muriati Mukhtar, Riza Sulaiman. A Conceptual Model of Lean Manufacturing Dimensions. Procedia Technol. 2013; 11: 1292–1298p.

Rauch Erwin, Patrick Dallasega, Matt Dominik T. Axiomatic Design Based Guidelines for the Design of a Lean Product Development Process. Procedia CIRP. 2015; 34: 112–118p.

Behrouzi Farzad, Kuan Yew Wong. Lean Performance Evaluation of Manufacturing Systems: A Dynamic and Innovative Approach. Procedia Comput Sci. 2011; 3: 388–395p.

Oleghe Omogbai, Konstantinos Salonitis. Variation Modeling of Lean Manufacturing Performance Using Fuzzy Logic Based Quantitative Lean Index. Procedia CIRP. 2016; 41: 608–613p.

Arslankaya Seher, Hatice Atay. Maintenance Management and Lean Manufacturing Practices in a Firm Which Produces Dairy Products. Procedia-Soc Behav Sci. 2015; 207: 214–224p.

Esa Mashitah Mohamed, Nor Azian Abdul Rahman, Maizurah Jamaludin. Reducing High Setup Time in Assembly Line: A Case Study of Automotive Manufacturing Company in Malaysia. Procedia-Soc Behav Sci. 2015; 211: 215–220p.

Salleh Noor Azlina Mohd, Salmiah Kasolang, Ahmed Jaffar. Simulation of Integrated Total Quality Management (TQM) with Lean Manufacturing (LM) Practices in Forming Process Using Delmia Quest. Procedia Eng. 2012; 41: 1702–1707p.

Rahani AR, Muhammad al-Ashraf. Production Flow Analysis through Value Stream Mapping: A Lean Manufacturing Process Case Study. Procedia Eng. 2012; 41: 1727–1734p.

Rahman Nor Azian Abdul, Sariwati Mohd Sharif, Mashitah Mohamed Esa. Lean Manufacturing Case Study with Kanban System Implementation. Procedia Economics and Finance. 2013; 7: 174–180p.

Lam Nguyen Thi, Le Minh Toi, Vu Thi Thanh Tuyen. Lean Line Balancing for an Electronics Assembly Line. Procedia CIRP. 2016; 40: 437–442p.

Nguyen Minh-Nhat, Ngoc-Hien Do. Re-engineering Assembly Line with Lean Techniques. Procedia CIRP. 2016; 40: 591–596p.

Rohani Jafri Mohd, Seyed Mojib Zahraee. Production Line Analysis via Value Stream Mapping: A Lean Manufacturing Process of Color Industry. Procedia Manufacturing. 2015; 2: 6–10p.

Choomlucksana Juthamas, Monsiri Ongsaranakorn, Phrompong Suksabai. Improving the Productivity of Sheet Metal Stamping Subassembly Area Using the Application of Lean Manufacturing Principles. Procedia Manufacturing. 2015; 2: 102–107p.

Dos Santos, Zélio Geraldo, Leandro Vieira, et al. Lean Manufacturing and Ergonomic Working Conditions in the Automotive Industry. Procedia Manufacturing. 2015; 3: 5947–5954p.

Indrawati Sri, Muhammad Ridwansyah. Manufacturing Continuous Improvement Using Lean Six Sigma: An Iron Ores Industry Case Application. Procedia Manufacturing. 2015; 4: 528–534p.

Widiasih Wiwin, Putu Dana Karningsih, Udisubakti Ciptomulyono. Development of Integrated Model for Managing Risk in Lean Manufacturing Implementation: A Case Study in an Indonesian Manufacturing Company. Procedia Manufacturing. 2015; 4: 282–290p.

Del Fabbro Enrico, Daria Santarossa. Ergonomic Analysis in Manufacturing Process. A Real Time Approach. Procedia CIRP. 2016; 41: 957–962p.

Jiménez-García JA, Téllez-Vázquez S, Medina-Flores JM, et al. Materials Supply System Analysis Under Simulation Scenarios in a Lean Manufacturing Environment. J Appl Res Technol. 2014; 12(5): 829–838p.

Metternich Joachim, Sven Bechtloff, Stefan Seifermann. Efficiency and Economic Evaluation of Cellular Manufacturing to enable Lean Machining. Procedia CIRP. 2013; 7: 592–597p.

Mostafa Sherif, Jantanee Dumrak, Hassan Soltan. Lean Maintenance Roadmap. Procedia Manufacturing. 2015; 2: 434–444p.

Soltan Hassan, Sherif Mostafa. Lean and Agile Performance Framework for Manufacturing Enterprises. Procedia Manufacturing. 2015; 2: 476–484p.

Hartini Sri, Udisubakti Ciptomulyono. The Relationship between Lean and Sustainable Manufacturing on Performance: Literature Review. Procedia Manufacturing. 2015; 4: 38–45p.

Chiabert Paolo, Gianluca D’Antonio, Inoyatkhodjaev J, et al. Improvement of Powertrain Mechatronic Systems for Lean Automotive Manufacturing. Procedia CIRP. 2015; 33: 53–58p.




DOI: https://doi.org/10.3759/joise.v3i1.3510

Refbacks

  • There are currently no refbacks.