Browse Title Index


 
Issue Title
 
Vol 9, No 2 (2019) A Literature Review on Al-Si-TiB2 In-situ Metal Matrix Composites Abstract
S. K. Sahoo, S. C. Mishra, B. Sarangi, S. C. Patnaik, J. Majhi
 
Vol 3, No 1 (2013) A Novel Technique for Improved Recovery of Mg-Analysis of the Microstructure and Physical Properties Abstract
B. P. Samal, A. K. Misra, S. C. Panigrahi, S. C. Mishra
 
Vol 1, No 1-3 (2011) A Review of the Bionic Surfaces for Engineering Applications Abstract
S. H. Deshmukh, Dr. C. L. Gogte
 
Vol 7, No 1 (2017) A Review on an Investigation on the Effect of Immersed Medium in Friction Stir Welding of Aluminium Alloys (AA 6061-T6) Abstract
Satyam Patel, H. N. Shah
 
Vol 4, No 2 (2014) A Study of Improvement of Mechanical Properties of Aluminum by Conventional Casing and Deformation Process Abstract
Hafiz Abdul Ahad Qazi
 
Vol 7, No 3 (2017) A Technical Review on Evaluation of Vegetable Oil in Water-Emulsion Cutting Fluid in Machining Steel with Coated Carbide Tool Abstract
Kunj Patel, Vikas Ramoliya, Bhaumik Prajapati, Akash Shukla
 
Vol 7, No 3 (2017) A Technical Review on Parametric Optimization of Welding Dissimilar Metals Abstract
Smit Pancholi, Sunil Vaghasiya, Raj Barad, Akash Shukla
 
Vol 4, No 3 (2014) Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel Abstract
N. Salahudeen, C. S. Ajinomoh, S. Nakakana
 
Vol 1, No 1-3 (2011) Al-MMC Foam: Synthesis and Characterisation Abstract
Joyjeet Ghose, Vinay Sharma, Surender Kumar
 
Vol 3, No 2 (2013) An Austempering Study of Ductile Iron and the Effect of Copper Addition on the Tensile Properties of Austempered Ductile Iron Abstract
S. K. Sahoo, S. C. Patnaik, S. Sen, J. Majhi
 
Vol 8, No 3 (2018) An Experimental Investigation on Hybrid Polymeric Composite Materials Reinforced with Sisal & Acacia Fiber Abstract
Ravichandran G, David Biju, Joshy John, Ratan Pinto, Rathnakar G
 
Vol 8, No 3 (2018) An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions Abstract
Praveen Kumar, Satpal Sharma
 
Vol 8, No 2 (2018) An extensive review on characterisation of Cu-Ni alloys Abstract
Santhosh A N, Aprameyan S
 
Vol 3, No 2 (2013) An Investigation on Effect of Welding Current Mode on Weld Quality Characteristics of Microplasma Arc Welding of Inconel 625 Sheets Abstract
Dr. Kondapalli Siva Prasad, Chalamalasetti Srinivasa Rao, Damera Nageswara Rao
 
Vol 8, No 1 (2018) An Overview of Welding of Aluminium Alloys through Pulse – Gas Metal Arc Welding Process Abstract
S H Mankar
 
Vol 5, No 1 (2015) Analysis of Friction Stir Welded Aluminum Alloys 2014 and 8011 Abstract
Murali K., Rajesh Kannan G., Deepan Bhararhi Kannaa T
 
Vol 6, No 2 (2016) Analysis of Process Parameters for Dissimilar Metal Welding Using MIG Welding: A Review Abstract
Pratik Kikani
 
Vol 2, No 1-3 (2012) Analysis of Properties of Copper-Alumina Composites Produced by Various Processing Routes: A Review Abstract
K. Dash, S. Gupta, B. C. Ray
 
Vol 8, No 3 (2018) Analysis of Steering Bracket to reduce its Manufacturing Failure Abstract
R. N. Todkar, A. K. Mhaske, C. R. More, K. M. Nirwal, S. C. Mumbare
 
Vol 3, No 3 (2013) ANN Controlled Plasma Spray Process by using Industrial Waste Abstract
Ajit Behera, P. Parida, R. K. Behera, S. C. Mishra
 
Vol 6, No 1 (2016) Anodic Polarization Study on Steel Bar in Concrete Powder Solution Extracts Contaminated with Chloride and Sulfate Salts Abstract
Bulu Pradhan, Harshavardhan N. Shinde
 
Vol 2, No 1-3 (2012) Application of Neural Network Analysis to Correlate the Properties of Plasma Spray Coating Abstract
Ajit Behera, S. C. Mishra
 
Vol 5, No 2 (2015) Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields: A Review Abstract
Mallik Kedar Mantrala, Ch. Srinivasa Rao, V. V.S. Kesava Rao
 
Vol 5, No 1 (2015) Behavior of Sandwich Composites under Edgewise and Flatwise Compression; Effect of Variation of Fibre Architecture and Core Density Abstract
Manujesh B. J, R. Vijayalakshmi Rao, Prajna M. R., Jnanesh N. A., Antony P. J.
 
Vol 1, No 1-3 (2011) Behaviour of NINL Blast Furnace with 100% Calibrated Lump Iron Ore Abstract
Santosh Kumar, R. K. Jha, N. G. Banerjee
 
1 - 25 of 156 Items 1 2 3 4 5 6 7 > >>