Open Access Open Access  Restricted Access Subscription or Fee Access

Characterization of Glass/Jute Hybrid Fibre Reinforced Epoxy Composite for Axial Flow Fan Blade

Venkata sushma chinta, P. Ravinder Reddy, Koorapati Eshwara Prasad, Krishna Sai Vadapally, Sathola Anand, B. Venkata Sai Kiran

Abstract


Traditionally axial flow fan blades were manufactured by using metal alloys, but with the increase in blade size the blades grew heavier resulting in more vibrations during its working. It is impossible to manufacture the metallic blades to close tolerances making it uneconomical. Due to this dimensional instability, the metallic impeller fan blades are instead fabricated with glass fiber reinforced plastics (GFRP). To reduce the after effects of GFRP blades on the environment necessitates the partial reinforcement of natural fibre. This paper deals with the characterization of GFRP blade material with partial Jute reinforcements i.e., glass to jute (95:5) weight percentage and estimating the properties like tensile strength, bending strength, shear strength, fracture toughness. The conventional GFRP blade material has 14 layers of glass fibers in various forms. By placing jute layer at various positions in GFRP blade material the mechanical strengths were estimated and compared with conventional one.


Keywords


Axial flow fan blade material, bending strength, fracture toughness, glass fibre/jute fibre, hybrid composite, shear strength, tensile strength

Full Text:

PDF

References


Wambua, P., Ivens, J., & Verpoest, I. (2003). Natural fibres: can they replace glass in fibre reinforced plastics? Composites Science and Technology, 63(9), 1259–1264.

Dong C. Review of natural fibre-reinforced hybrid composites. J Reinf Plast Compos 2018;37:331–48.

Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016). A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing, 83, 98–112.

Li, X., Tabil, L. G., & Panigrahi, S. (2007). Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review. Journal of Polymers and the Environment, 15(1), 25–33.doi:10.1007/s10924-006-0042-3

Sirvaitiene A, Jankauskaite V, Bekampiene P and Kondratas A 2013 Influence of natural fibre treatment on interfacial adhesion in biocomposites Fibres Text East Eur. 21 123–9

Mohammed A A, Bachtiar D, Rejab M R M and Siregar J P 2018 Effect of microwave treatment on tensile properties of sugar palm fibre reinforced thermoplastic polyurethane composites Def. Technol. 14 287–90

Saha, P., Manna, S., Roy, S., Sen, R., Roy, D., and Adhikari, B 2010 Bioresource technology enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment Bioresour. Technol. 101 3182–7

Gassan J., Bledzki AK. Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres. Compos Sci Technol 1999;59:1303–9.

Mwaikambo, LY., and Ansell M P 2002 Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization J. Appl. Polym. Sci. 84 2222–34.

Gassan, J., & Bledzki, A. K. (1997). The influence of fiber-surface treatment on the mechanical properties of jute-polypropylene composites. Composites Part A: Applied Science and Manufacturing, 28(12), 1001–1005.doi:10.1016/s1359-835x(97)00042-0

Safri SNA, Sultan MTH, Saba N, Jawaid M. Effect of benzoyl treatment on flexural and compressive properties of sugar palm/glass fibres/epoxy hybrid composites. Polym Test 2018.

Karabulut, N., Aktas, M., & Balcloglu, H. E. (2018). Surface Modification Effects on the Mechanical Properties of Woven Jute Fabric Reinforced Laminated Composites. Journal of Natural Fibers, 1–15.

Safri SNA, Sultan MTH, Jawaid M, Jayakrishna K. Impact behavior of hybrid composites for structural applications: A review. Compos Part B Eng 2018; 133:112–21.

M. Muthuvel, G. Ranganath, K. Janarthananand and K. Srinivasan, Int. J. Eng. Res. & Tech., 2, 335 (2013).

Jawaid, M., Abdul Khalil, H. P. S., & Abu Bakar, A. (2011). Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Materials Science and Engineering: A, 528(15), 5190–5195.doi:10.1016/j.msea.2011.03.047

Rafiquzzaman, Md., Islam, M., Rahman, H., Talukdar, S., & Hasan, N. (2016). Mechanical property evaluation of glass-jute fiber reinforced polymer composites. Polymers for Advanced Technologies, 27(10), 1308–1316.doi:10.1002/pat.3798

Rafiquzzaman, Md., Mahbuba, Z.: Jute-Glass Fiber Based Composite for Engineering Application. European Journal of Advances in Engineering and Technology 4(7), 510-515 (2017).

Gujjala R, Ojha S, Acharya SK, Pal SK. Mechanical properties of woven jute-glass hybrid-reinforced epoxy composite. J Compos Mater 2014;48:3445–55.

ASTM D3039 2017 Standard test method for tensile properties of polymer matrix composite materials

ASTM D7264 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials

IS: 1998-1962, Indian Standard methods for thermosetting synthetic resin bonded laminated sheets.

ASTM D5045-14 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

ASTM D2734 2016 Standard test methods for void content of reinforced plastics ASTM Stand 08.01

ASTM D792 2013 Standard test methods for density and specific gravity of plastics by displacement ASTM Stand 08.01




DOI: https://doi.org/10.37591/jopc.v7i3.3427

Refbacks

  • There are currently no refbacks.