Open Access Open Access  Restricted Access Subscription or Fee Access

Castellated Beams with and without Stiffeners- A Review

shivtej pravin kharade, surekha Bhalchandra

Abstract


Use of castellated beams has it benefits like it is economical, gives more strength with less material, easy to erect. Studies related to castellated beam show that quantifiable reduction in the weight of structure is accomplished by allowing web openings without reducing structural strength or requirements of serviceability. Castellated beams are fabricated by cutting I section in zig zag pattern to create shapes like hexagonal, circular, rectangular  and re-joining it by welding both the parts together and increasing its depth ultimately leading to increase its strength. Hence the strength of I section is increased with same amount of material that was required for parent I section. Various modes of failure are identified in castellated beam, failure by either the formation of a flexural mechanism, by lateral torsion buckling, vertical shear failure, and formation of vierendeel mechanism, shear buckling of a web post and by rupture of welded joints. Based on various mode of failure, the applicable methods of analysis are studied which includes plastic analysis, mid post yielding and buckling analysis. Using software like ABAQUS, MSC/NASTRAN and ANSUS14. Study show that use of stiffener in welded portion minimizes the failure and increase the strength of beam.

Keywords


Beams, Castellated beams, Stiffener

Full Text:

PDF

References


B.Anupriya, Dr.K.Jagadeesan, “Shear Strength Of Castellated Beam With And Without Stiffeners Using FEA (ANSYS 14)”, International Journal of Engineering and Technology (IJET), Volume 6, pp 1970-1981, (2014).

D Kerdal and D.A. Nethercot, “Failure modes of castellated beams”, Journal of Construction Steel Research, Volume 4, pp 295-315, (1984).

Delphine Sonck, “Experimental investigation of residual stresses in steel cellular and castellated members”, Construction and Building Materials, Volume 54, pp 512–519, (2013).

Desi Sandy, Richard Frans, et.al, “ Numerical modeling of hexagonal castellated beam under monotonic loading”, Procedia Engineering journal, Volume 171, pp 781 – 788, (2017).

Erdal F, Saka M.P, “Ultimate load carrying capacity of optimally designed steel cellular beams”, Journal of Construct Steel Research, pp 355-68, (2013).

H. Estrada, J. J. Jimenez, et.al, “Cost Analysis in the Design of Open-Web Castellated Beams”, Architectural Engineering Conference (AEI) 2006, pp 1-10, (2012).

H.A.Sarvestani, “Cyclic behaviour of hexagonal castellated beams in steel moment resisting frames with post-tensioned connections”, Structures, Volume 11, pp 243-280, (2017).

Jamadar A. M, Kumbhar P. D, “Parametric study of castellated beam with circular and diamond shaped openings”, International Research Journal of Engineering and Technology (IRJET), Volume: 02, pp 715-722, (2015).

Konstantinos Daniel Tsavdaridis & Theodore Papadopoulos, “A FE parametric study of RWS beam-to-column bolted connections with cellular beams”, Journal of Constructional Steel Research, Volume 116, pp 92–113, (2016).

M.A. Dabaon, et.al, “Structural behaviour of arched steel beams with cellular openings”, Journal of Constructional Steel Research 148, pp 756–767, (2018).

Nikos D. Lagaros, Lemonis D. Psarras, Manolis Papadrakakis, Giannis Panagiotou “Optimum Design of Steel Structures with Web Openings”, Engineering Structures Volume 30, pp 2528–2537, (2008).

P.D. Pachpor, Dr.N.D. Mittal, et.al. “Finite Element Analysis And Comparison Of Castellated & Cellular Beam”, Advanced Materials Research, Volume 264-265, pp 694-699, (2011).

Peijun Wang, Ning Ma, Xudong Wang, “Numerical studies on large deflection behaviours of restrained castellated steel beams in a fire”, Journal of Constructional Steel Research, Volume 100, pp 136-145, ( 2014).

Peijun Wang, Qijie Ma, “Investigation on Vierendeel mechanism failure of castellated steel beams with fillet corner web openings”, Journal of Engineering Structures, pp 44-51, (2014).

Resmi Mohan & Preetha Prabhakaran, “Finite Element Analysis to Compare the Deflection of Steel Beam with and without Web Openings”, IOSR Journal of Mechanical and Civil Engineering, pp 7-11, (2016).

Siddheshwari A. Patil, Popat D Kumbhar “Comparative Study of Transverse Stiffeners and Stiffeners along the Opening Edge used for Castellated Beam”, International Journal of Innovative Research in Science Engineering and Technology, Volume 5, pp 8516-8522, (2016).

Siddheshwari. A. Patil, Popat. D. Kumbhar, "Study Of Castellated Beam Using Stiffeners: A Review", International Journal of Research in Engineering and Technology, (IJRET), Volume 4, pp. 50-54, (2015).

Soltani MR, Bouchaïr A, Mimoune M, “Nonlinear FE analysis of the ultimate behaviour of steel castellated beams”, Journal of Construct Steel Research, pp 101-14, (2011).

Wakchaure MR, Sagade A.V, “Finite element analysis of castellated steel beam”, International Journal of Engineering Innovative Technology, pp 3744-55, (2012).

Wakchaure MR, Sagade AV, Auti VA, “Parametric study of castellated beam with varying depth of web opening”, International Journal of Scientific Research Publications, pp 2153-60, (2012).




DOI: https://doi.org/10.3759/josem.v6i2.1430

Refbacks

  • There are currently no refbacks.