Experimental Study of Flexural Behavior of High Strength Concrete
Abstract
Keywords
Full Text:
PDFReferences
Indian Standard code of practice for plain and reinforced concrete, IS 456-2000, Bureau of Indian Standards (BIS), New Delhi.
ACI Committee 318, “Building code requirements for structural concrete (ACI318-14) and commentary (318R-14),” American Concrete Institute (ACI), Farmington Hills, Michigan, 2014.
N.P. Rajamane, M.C. Nataraja and T.P. Ganesan, “A technical look at ‘Individual test result’ criterion for concrete acceptance as per IS 456-2000”, The Indian Concrete Journal (ICJ), February April 2012, pp. 26-37.
C.V.R. Murty, “Shortcomings in structural design of IS 456-2000”, The Indian concrete Journal (ICJ), February 2001, pp. 150-157.
N. Subramanian, “Limiting reinforcement ratios for reinforced concrete flexural members”, The Indian Concrete Journal (ICJ), September 2010, pp. 71-80.
Donza H., Cabrera E. F. and Irasssar E. F., “High strength concrete with different fine aggregate”, Cement and Concrete Research, 2002, Vol. 32, No. 11, pp. 1755-1761.
Horia Constantinescu, Oana Gherman, Camelia Negrutiu, Sosa Pavel Ioan. “Mechanical properties of hardened high strength concrete”, 9th International Conference Interdisciplinary in Engineering, INTER-ENG 2015, 8-9 October 2015, Tirgu-Mures, Romania, Elsevier, Procedia Technology 22 ( 2016 ), pp. 219–226.
Andrew Logan, Wonchang Choi, Amir Mirmiran, Sami Rizkalla, and Paul Zia, “Short term mechanical properties of high strength concrete”, ACI Material Journal, Vol. 106, No. 5, September-October 2009, pp. 1-7.
Gintautas Skripiunas, Zymantas Rudzionis, and Vitoldas Vaitkevicius, “Complex admixtures for high strength concrete”, Journal of civil engineering and management, ISSN 1392-3730, 20002, Vol. 8, No. 4, 276-280.
Andrew Logan, Wonchang Choi, Amir Mirmiran, Sami Rizkalla, and Paul Zia, “Short term mechanical properties of high strength concrete”, ACI Material Journal, Vol. 106, No. 5, September-October 2009, pp. 1-7.
M. A. Rashid and M. A. Mansur, “Reinforced high strength concrete beams in flexure”, ACI Structural Journal. Vol. 102, No. 3, May-June 2005, pp. 462-471.
Oztekin, E., Pul, S., and Husem, M., “Determination of rectangular stress block parameters for high-performance concrete,” Engineering Structures, Vol. 25, 2003, pp. 371-376.
L. F. A. Bernardo and S. M. R. Lopes, “Neutral Axis Depth versus Flexural Ductility in High-Strength Concrete Beams”, Journal of Structural Engineering, Vol.130, No. 3, March 1, ASCE 2004, pp. 442-459.
Togay Ozbakkaloglu and Murat Saatcioglu, “Rectangular stress block for high strength concrete”, ACI Structural Journal, V. 101, No. 4, July-August 2004, pp. 475-483.
Pam, H. J., Kwan, A. K. H and Islam, M. S., "Flexural strength and ductility of reinforced normal and high strength concrete beams", Structures & Buildings, Vol. 146, No. 4, 2001, pp. 381-389.
J. C. M. Ho, A. K. H. Kwan and H. J. pam. “Minimum flexural ductility design of high strength concrete beams”, Thomas Telford Ltd., Magazine of Concrete Research, Vol. 56, No. 1, February 2004, pp. 13-22.
Teng-Hooi Tan and Ngoc-Ba-Nguyen, “Flexural behavior of confined high strength concrete columns”, ACI Structural Journal, Vol. 102, No. 2, March-April 2005, pp.198-205.
Sarkar, S., Adwan, O., Munday, J. G. L., “High strength concrete: an investigation of the flexural behavior of high strength RC beams,” The Structural Engineer, Vol. 75, No.7, April 1997, pp 115-121.
Samir A. Ashour, “Effect of compressive strength and tensile reinforcement ratio on flexural behavior of high strength concrete beams”, Engineering Structures Vol. 22 (2000), Elsevier Science Ltd., pp.413–423.
Togay Ozbakkaloglu and Murat Saatcioglu, “Rectangular stress block for high strength concrete”, ACI Structural Journal, V. 101, No. 4, July-August 2004, pp. 475-483.
DOI: https://doi.org/10.3759/josem.v6i2.1568
Refbacks
- There are currently no refbacks.