Open Access Open Access  Restricted Access Subscription or Fee Access

Analysis of Quicklime Production from Eggshell through Factorial Study

Rishikesh Tiwari

Abstract


Factorial analysis is a method used in experimental design to assess the impact of different input factors on the resulting output. Quicklime is used extensively in many sectors, including those that produce paper, glass, tannery products, agriculture, water treatment, building, and agriculture. This study focused on evaluating key parameters in the calcination process, specifically calcination temperature, calcination time, and the size of eggshell and snail shell particles. The study successfully developed and validated two process models for factorial analysis. Validation tests demonstrated that the models were accurate, with prediction intervals within the 95% confidence range, and residual errors below 5%. The study's findings demonstrated the importance of the interactions between calcination temperature, calcination time, and eggshell and snail shell particle size on quicklime yield and reactivity. Using the factorial approach, the study recommended optimal settings for quicklime production. A compromise between a calcination temperature of 900°C and a calcination time of 150 minutes was found to yield the highest quicklime quantity at 93.5232%. Alternatively, an optimal calcination time of 210 minutes and a calcination temperature of 895.03°C resulted in the best quicklime reactivity at 0.467835°C/s.

Full Text:

PDF

References


Aggarwal, A., Singh H., Kumar, P., & Singh, M. (2009). Modelling of machining parameters and cooling conditions in hard turning of AISI P-20 tool steel using response surface methodology and desirability graphs, International Journal of Machining & Machinability of Materials, 4(1),

-110.

Akande, H. F. (2015). Multiple Response Optimization of Quicklime Production from Limestone Using Design of Experiment. Minna: PhD Thesis Federal University of Technology, Minna,Nigeria

Antonia, M., Bakolas, A., & Aggelakopoulou, E. (2000). The Effects Of Limestone Characteristics and Calcination Temperature to The Reactivity of the Quicklime. Cement and Concrete Research, 3-5.

Arias. J.L, Fink, D.J., Xiao, S. Q., Heuer, A.H., Caplan, A.I. (1993) Biomineralisation of eggshells: cell-mediated acellular compartments of mineralised extracellular matrix. lnt.Rev.Cytol. Vol. 145: 217-250.

Baziotis, I., Leontakianakos, G., Ekonomou, G., Delagrammatikas, G., Galbenis, C. T., & Tsimas, S. (2010). A Case Study of Different Limestones during Quicklime and Slaked-Lime Production. Geological Society of Greece, 3(4), 2-5.

Bello, N. M. (2015). Calcination Kinetics of Okpella Limestone from Thermogravimetric Data for Limes Production.Minna: Unpublished MEng Thesis Federal University of Technology, Minna, Nigeria.

Bhattacharya, T.K., Ghosh, A. & Das, S.K. (2001). Densification of Reactive Lime from Limestone. CeramicsInternational, 27(3), 455-459.

Borgwardt, R. H. (1985). Calcination Kinetics and Surface Area of Dispersed Limestone Particles. AIChE Journal, 31 (1), 103-111.

Borkowski, J. J., & Lucas, J. M. (1997). Designs of Mixed Resolution for Process Robustness Studies. Technometrics, 39(4), 63-70.

Borror, C. M., & Montgomery, D. C. (2000). Mixed Resolution Designs as Alternatives to Taguchi Inner/Outer Array Designs for Robust Design Problems. Quality and Reliability Engineering International, 16(3), 117-127.

Box, G.E. P. & Wilson, K. B. (1951). On the experimental attainment of optimum conditions. Journal of the Royal Statistical Society, Series B,13(1), 1–45.

Boynton, R. S. (1980). Chemistry and Technology of Lime and Limestone. New York: John Wiley& Sons Publishing, USA.

Dogu, G. & Mine. (2002). Calcination Kinetics of High Purity Limestones. Chemical Engineering Journal, 5, 1-2.

Foraminifera (2012). Hydrated Lime Production from Limestone in Nigeria How Viable.Retrieved from http://www.foramfera.com/index.php/investment-opportunities-in-

nigeria/item/420.


Refbacks

  • There are currently no refbacks.