Wear Analysis of Al-SiC Composite Valve Guide by Using ANSYS: A Review

Authors

  • Nikulkumar K Lathiya Department of Mechanical Engineering, RK University, Rajkot, Gujarat, India
  • Ahmed Sayyed Department of Mechanical Engineering, RK University, Rajkot, Gujarat, India

DOI:

https://doi.org/10.37591/joaea.v2i3.4562

Keywords:

Composites, Al-Sic, valve guide

Abstract

This application of using that can promise for the future growth. To finding a wear rate of the material and comparing to the cast iron basically using in continuous life. First of all aluminum silicon carbide using in aerospace engineering, Then some few year this composite material also can be used in automobile engineering. Aluminum silicon carbide mostly used there excellent properties like high wear resistance, low density, good strength to weight ratio. Due to these properties of composite material have found the application of various automotive parts. Basically, this material using there light in weight in industrial area. Light in weight properties this material manufacture component such as cylinder, valve seat insert, crankshaft, and camshaft.

 

References

Dunn DJ, Balancing of Reciprocating Machinery. 2015.

Lucio A. d. S. R. a. M., Balancing of Lightweight Crankshaft and its performance under Virtual Engine Operation, SAE nternational. 2013.

Rattan SS, Theory of Machines, 3 ed., Tata McGra Hill; 2010, 477–527p.

Johansson T, w-9 Engine Design, 2006.

Reinhoitz M. a., Mechanism and Dynamics of Machinery, 5 ed., 2006.

Orzechowski C. L. a. J., Theoretical and Practical Aspects of Balancing a V-8 Engine Crankshaft, SAE International. 2005.

Suh KH, Kilee Y, Yoon HS, A Study on the Balancing of the Three-Cylinder Engine with Balance Shaft, SAE International Paper. 2000.

Taylor CF, The Internal Combustion Engine In Theory and Practice, Vol. 2, MIT Press; 1985.

Van Drift TC, Tyler JM , Automotive Engineering Balancing Problems, SAE International Paper; 1934.

Bull AA, Practical Balancing of Engine Components, SAE International. 1924.

Hymans F., Dynamic Balancing of Rotating Parts, SAE International Paper. 1917.

Shariff A., Theory of Machines. http://www.amazon.in/Theory-Of-Machines-Khurmi-CHAND-ebook/ dp/B011Y5C2R8?tag=googinhydr18418-21&tag=googinkenshoo-21&ascsubtag =ac3a3838-e798-4beb-9916-fb63c017f18c

Bongale VV, Dynamics of Machines, Online, Accessed 2015.

Sharma R, Analysis of Balancing of Multi-cylinder, Online, Accessed 2015.

Downloads

Published

2020-12-04

Issue

Vol. 2 No. 3 (2015)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.