Study of Two-distinct Automotive Bumper Beam Designs during Low Speed Impacts
Abstract
Keywords
Full Text:
PDFReferences
United Nations agreement, Uniform provisions concerning the approval of vehicles with regards to their front and rear protective devices (bumpers, etc.), E.C.E., 1994.
Williams DA, Parkin CC. European new car assessment programme (Euro NCAP) Testing protocol. Transport Research laboratory, version 2, May 1999.
Detwiler, Duane T., Ryan A. Miller. Development of a sport utility front bumper system for pedestrian safety and 5 mph impact performance. No. 2001–06– 0056, SAE Technical Paper, 2001
Paul Du Bois, et al. Vehicle Crashworthiness and occupant protection. Automotive Applications Committee, American Iron and Steel Institute, Michigan, 2004.
Rose, Nathan A., Stephen J. Fenton, Gray Beauchamp. Restitution modeling for crush analysis: Theory and validation. No. 2006–01–0908, SAE Technical Paper, 2006.
Nitin S. Gokhale, Sanjay S. Despande, Dr. Anand N. Thite. Practical Finite Element Analysis. Finite To Infinite, India, 2007.
Bryan C. Baker, Joseph M. Nolan, Brian O’Neill and Alexander P. Genetos. Crash compatibility between cars and light trucks: Benefits of lowering front-end energy absorbing structure in SUVs and pickups. Science Direct, pp.116–125, 2007.
Liu, Yucheng, and Michael L. Day. Experimental analysis and computer simulation of automotive bumper system under impact conditions. International Journal for Computational Methods in Engineering Science and Mechanics 9, no. 1, 51–59, 2008.
Marzbanrad JM, Alijanpour M, Kiasat MS. Design and analysis of automotive bumper beam in low speed frontal crashes. thin-Walled Structures-47, 902–911, 2009.
Park, DK, CD. Jang, SB Lee, SJ Heo, HJ Yim, MS. Kim. Optimizing the shape of a bumper beam section considering pedestrian protection. International Journal of Automotive Technology 11, no. 4, 489– 494, 2010
Carrie M. Tamarelli. The Evolving Use of Advanced High-Strength Steels for Automotive Applications. Materials Science and Engineering University of Michigan, 48075, 2011.
Jovan Obradovic, Simonetta Boria and Giovanni Belingardi. Lightweight design and crash analysis of composite frontal impact energy absorbing structures. Science Direct paper, pp. 423–430, 2011
Davoodi, M.M., S.M. Sapuan, Ali Aidy, NA Abu Osman, Azim Ataollahi Oshkour, and WAB Wan Abas. Development process of new bumper beam for passenger car: A review. Materials & Design 40, 304–313, 2012.
Tamim, A.F., S.A. Albatlan. New Trends To Improve Impact Resistance For Automotive Bumper. In The International Conference on Applied Mechanics and Mechanical Engineering, vol. 15, pp. 1–9, 2012.
Barrier frontal impact testing protocol Euroncap (November 2015) Version 7.1.1
Mongiardini, M., M.H. Ray, R. Grzebieta, M. Bambach. Verification and validation of models used in computer simulations of roadside barrier crashes. In Australasian Road Safety Research Policing Education Conference, 2013, Brisbane, Queensland, Australia. 2013.
European Aluminium Association. Applications-car body-crash management systems. The Aluminum Automotive Manual (2013).
Marzougui, D., D. Brown, H.K. Park, C. D. Kan, K.S. Opiela. Development & Validation of a Finite Element Model for a Mid-Sized Passenger Sedan. In Proceedings of the 13th International LS- DYNA Users Conference, Dearborn, MI, USA, pp. 8–10. 2014.
Euro, N.C. A.P. European new car assessment programme (Euro NCAP): Assessment protocol–adult occupant protection. Version 7.0. 2. Tech. rep., Euro NCAP, 2 Place du Luxembourg, 1050 Brussels, Belgium, 2015
Siddeshwara B, Ph.D. report, Design Of Bumpers of Light Commercial Vehicles For Effective Energy Absorption During The Frontal Impact, 2016 21. Liu, Chih Hsing, Ying Chia Huang, Chen Hua Chiu, Yu Cheng Lai, and Tzu Yang Pai. Design and analysis of automotive bumper covers in transient loading conditions. In Key Engineering Materials, vol. 715, pp. 174–179. Trans Tech Publications Ltd, 2016
Teng, Tso-Liang, Cho-Chung Liang, and Tuan-Anh Vu. Bumper shape design for pedestrian safety. Journal of Mechanical Science and Technology 30, no. 7, 3243– 3251, 2016
Sangamesh Basavaraj. Design, analysis, fabrication of composite frontal crash beam for passenger vehicle. International Journal of Intellectual Advancements and Research in Engineering Computations, vol.05(4), 3512–3524, 2017
Sagar, P. Sudha, D. Kamalakkannan. Performance Enhancement of a Car Bumper using Crash Analysis. Int. J. Adv. Technol. Innov. Res. 9. 0769–0772, 2017.
Sonawane, Chandrakant Rameshchandra, Ajit Lavaji Shelar. Strength Enhancement of Car Front Bumper for Slow Speed Impact by FEA Method as per IIHS Regulation. Journal of The Institution of Engineers (India): Series C. 99, no. 5, 599–606, 2018.
Hallquist J.O., LS-DYNA keyword user’s manual. R11.0, revision: 10580, Livermore, CA: Livermore Software Technology Corp. 2018.
DOI: https://doi.org/10.37591/joaea.v7i3.5052
Refbacks
- There are currently no refbacks.