Experimental Investigation of a 4-Stroke Diesel Engine for Varying Fuel Injection Pressure and Compression Ratio
Abstract
Diesel engines are widely used in transportation, agriculture, power sector and various other types of industries due to its high fuel efficiency. An improvement in the performance of the same makes remarkable difference in nation economy. This paper presents an experimental investigation of a 4-stroke engine, using diesel as a fuel. The engine is modified to study the effect of various parameters on the performance of engine. The parameters varied are; fuel injection pressure and compression ratio. The fuel injection pressure is measured using piezo-resistive sensors and is varied from 224 to 240 bar. The compression ratio is varied from 16 to 18 by changing the clearance volume. It has been experimentally observed that as the fuel injection pressure increases, the efficiency of the engine decreases and as the compression ratio increases, the efficiency of the engine increases.
Full Text:
PDFReferences
Cummins CL. Journal of Internal Fire, SAE International Inc.; 1989.
Givens L. A Technical History of the Automobile. Automotive Eng, SAE International Inc. 98(6–8).
Bauer H. Diesel-Engine Management. Stuttgart: SAE; 1999.
Alperstein M, Swim WB, Schweitzer PH. Fumigation Kills Smoke Improves Diesel Performance. SAE Trans. 1958; 66: 574–588p.
Brijesh P, Sreedhara S. Exhaust Emissions and its Control Methods in Compression Ignition Engines: A Review. Int J Auto Tech. 2013; 14(2): 195–206p.
Subramanian KA, Mariappa RP, Das LM, et al. Simultaneous Reduction of NOx and Smoke Emissions of a DI Diesel Engine with Partial HCCI Mode. SAE Paper No. 2009-01-0259.
DOI: https://doi.org/10.37591/joaea.v3i3.7181
Refbacks
- There are currently no refbacks.