Impact of water-cement ratio and cement content on pore area percentage and chloride diffusion – A molecular dynamics study

Authors

  • K. S. Shahnaz
  • M. S. Islam

Abstract

The exposure of a reinforced structure to water-based settings leads to the occurrence of chloride-induced corrosion, resulting in a reduction in both the durability and performance of the structure. The entry of chloride ions into concrete and the pore area percentage is influenced by several elements, including the degree of humidity, the presence of fractures, environmental conditions, water-to-cement ratio (w/c ratio), and cement content.  This research focuses on the utilization of the Molecular Dynamics (MD) simulation approach for determining the diffusion coefficient of chloride ions and the pore area percentage within concrete. The evaluation additionally considers the influence of water-to-cement ratio (w/c ratio) and cement concentration on the diffusivity of chloride ions. The diffusion coefficients were determined to be 2.16x10-12 m2/s, 3.62x10-12 m2/s respectively, for varying water-to-cement ratios of 0.40 and 0.50, while keeping the cement content constant. The diffusion coefficients were determined as 2.16x10-12 m2/s, 2.89x10-12m2/s with varying cement content of 350 kg, 300 kg while maintaining a constant water-to-cement ratio. The pore area percentage were calculated 18.7% and 24.5% for varying water-to-cement ratios of 0.40, 0.50 .The pore area percentage were calculated 15.6% and 18.7%  with varying cement content of 300 kg/m3, 350 kg/m3 while maintaining a constant water-to-cement ratio .The findings from the simulation demonstrate a clear and significant impact of the water-to-cement ratio (w/c ratio) and cement concentration on the diffusion coefficient of chlorine and pore area percentage.

References

Al-Gadhib AH (2010). Numerical simulation of chloride diffusion in RC structures and the implications of chloride binding capacities and concrete mix. International Journal of Civil & Environmental Engineering, 10(5), 19-28.

Al-matar A, Tobgy AH, Al-Faiad MA (2012). Self-diffusion coefficient of Lennard-Jones fluid using temperature dependent interaction parameters at different pressures. Sixth Jordan International Chemical Engineering Conference, Amman, Jordan.

Erdoǧdu Ş, Kondratova IL, Bremner TW (2004). Determination of chloride diffusion coefficient of concrete using open-circuit potential measurements. Cement and Concrete Research, 34, 603-609.

Hirschfelder JO, Curtiss CF, Bird RB (1964). Molecular Theory of Gases and Liquids. John Wiley and Sons, New York.

Nissen T (2016). Chloride Ingress in Concrete. Ph.D thesis, Norwegian University of Science and Technology, Gjøvik, Norway.

Rapaport DC (2004). The Art of Molecular Dynamics Simulation, (2nd edition). Cambridge University Press, New York.

Townsend HE, Cleary HJ, Allegra L (1981). Breakdown of oxide films in steel exposure to chloride solutions. NACE Corrosion, 37, 384-391.

Rokon, R., Islam, M. S., & Mursalin, N. E. (2019). Effect of w/c ratio and cement content on diffusivity of chloride ion in concrete: A molecular dynamics study. Challenge Journal of Concrete Research Letters, 10(4), 83-88.

Guimarães, A. T. D. C., Climent, M. A., De Vera, G., Vicente, F. J., Rodrigues, F. T., & Andrade, C. (2011). Determination of chloride diffusivity through partially saturated Portland cement concrete by a simplified procedure. Construction and Building Materials, 25(2), 785-790.

Fu, J., & Yu, Y. (2019). Experimental study on pore characteristics and fractal dimension calculation of pore structure of aerated concrete block. Advances in Civil Engineering, 2019.

Downloads

Published

2023-12-28

Issue

Vol. 13 No. 3 (2023)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.