Temperature Control Techniques for Heat Exchanger System: A Review

Authors

  • Sagar Dhokiya Department of Instrumentation and Control Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Jimit A. Talati Department of Instrumentation and Control Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • Pooja Panchal Department of Instrumentation and Control Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India

DOI:

https://doi.org/10.37591/joci.v8i1.1795

Abstract

Heat transfer from one process fluid to another is necessary application of the process control. Heat exchangers are most widely used in industrial application to transfer of heat. Different types and configuration according to its flow, temperature and pressure, etc. are used for different application. Oil and gas, food industries, HAVAC system, power generation heat exchanger are widely used. Control objective is to keep outlet temperature of heat exchanger at desired temperature level. To control outlet temperature of heat exchangers conventional and complex structure are used. The simulation result obtained by using MATLAB or other software are compared with conventional controller and performance comparison are outlined in this paper.

Keyword: Heat exchanger, PID, Fuzzy Logic controller, Adaptive control, observer regulator

Cite this Article
Sagar Dhokiya, Jimit A. Talati, Pooja Panchal. Temperature Control Techniques for Heat Exchanger System: A Review. Journal of Control & Instrumentation. 2017; 8(1): 1–11p.

Downloads

Published

2019-03-30

Issue

Vol. 8 No. 1 (2017)

Section

Articles

License

Journal Title:

Title of the Paper:

Corresponding Author’s Information:

Name: Address:

E-mail:

Contact Number:

It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.

This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.

I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

 I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.

I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)

1. ________________

2. ________________

3. ________________

4. ________________

The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).