Design and Analysis of EV Controller using IPMSM Taking Core Loss into Account
DOI:
https://doi.org/10.37591/joci.v6i2.2009Abstract
Now a days vehicles with electrical differentials are becoming more and more popular. The mechanical differentials are replaced by using two motors. In the electrical vehicle (EV) different types of electrical machines such as induction motor, permanent magnet synchronous motor etc. are used. The controller design for the different motors is a fascinating and challenging work to obtain desired performance properly. The interior-permanent magnet synchronous motor (IPMSM) has already been used to design electrical differential for an EV. The controllers which have been designed for this purpose depend on the mathematical model of IPMSM. Unfortunately, to design the controller for IPMSM the core loss has not been considered, but to obtain the precise torque control the core loss of an IPMSM should be considered. In this paper, the PI controllers of an electrical differential for an EV system based on the IPMSMs taking core loss is designed. The performances of designed controllers are evaluated by Matlab/Simulink software. In the simulation work three road conditions for EV are considered. One is when the road is curved to right. Other is when the road is curved to left and another one is for the slope type road. Their performances are shown separately as well as all together.
Keywords: Electrical vehicle, IPMSM, electrical differential
Cite this Article
Mohammad Abdul Mannan, Moha-mmad Ashraful Alam. Design and Analysis of EV Controller Using IPMSM Taking Core Loss into Account. Journal of Control & Instrumentation (JoCI). 2015; 6(2): 1–8p.
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
