Level Control of Tank System: Comparative Approach
DOI:
https://doi.org/10.37591/joci.v6i2.2011Abstract
Level measurement and control and monitoring are important for many products and processes in a diverse range of industries including manufacturing, storage and service industries. In this paper liquid level in the cylindrical tank is to be controlled at desired value. The composite controllers of proportional integral controller and proportional integral derivative controller was designed using Ziegler Nichols tuning for the cylinderical tank system. The fuzzy logic controller was implemented with two inputs, setpoint and feedback signal. The proposed controllers were tested with periodically varying liquid levels. The controllers were tracking the setpoint exactly. The transient responses of PI, PID and fuzzy logic controllers were analysed using MATLAB Simulink software.
Keywords: Transient response, setpoint tracking, FLC, PI, PID
Cite this Article
Elizabeth Rani T, Lavanya M, Shanmuga Priya K. Level Control of Tank System: Comparative Approach. Journal of Control & Instrumentation (JoCI). 2015; 6(2): 9–12p.
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).