Open Access Open Access  Restricted Access Subscription or Fee Access

Regulation of Boost Converter Using Double Integral Sliding Mode controller with CPL

S. M. Taraka Bala, B. Amarendra Reddy, A. Venkatesh, G. Aliveni, Ch. Nayak Bhukya

Abstract


This paper represents a robust nonlinear control strategy to solve the instability problem of dc-dc boost power converter with constant power load by using double integral sliding mode control (DISMC) method. DISM is an indirect type of sliding mode control strategy and overcomes the problems due to CPL. DISM provides better tracking performance of voltage and eliminates voltage steady state error. This strategy ensures large signal stability as well as fast recovery performance as compared to other control methods. To show the effectiveness of the DISM in overcoming instability issues of the CPL in boost converter a 24 to 48 V converter is designed, and MATLAB simulation performed.


Full Text:

PDF

References


A. Emadi, A. Khaligh, C. H. Rivetta, and G. A. Williamson, “Constant power loads and negative impedance instability in automotive systems: Definition, modeling, stability, and control of power electronic converters and motor drives,” IEEE Trans. Veh. Technol., vol. 55, no. 4, pp. 1112–1125, Jul. 2006.

S. Singh, A. R. Gautam, and D. Fulwani, “Constant power loads and their effects in DC distributed power systems: A review,” Renewable Sustain. Energy Rev., vol. 72, pp. 407–421, Jan. 2017.

V. Grigore, J. Hatonen, J. Kyyra, and T. Suntio, “Dynamics of a buck converter with a constant power load,” in Proc. 29th Annu. IEEE Power Electron. Spec. Conf., vol. 1, May 1998, pp. 72–78

A. Kwasinski and P. T. Krein, “Passivity-based control of buck converters with constant-power loads,” in Proc. IEEE Annu. Power Electron. Spec. Conf., 2007, 17–21 June 2007; Orlando, FL, USA. US: IEEE Press; pp. 259–265

R. D. Middlebrook, “Input filter considerations in design and application switching regulators,” in Proc. IEEE Ind. Appl. Soc. Annu. Meeting, 1976, Chicago, IL, October 1976, pp. 366–382

M. Cespedes, L. Xing, and J. Sun, “Constant-power load system stabilization by passive damping,” IEEE Trans. Power Electron., vol. 26, no. 7, pp. 1832–1836, Jul. 2011

R. W. Erickson and D. Maksimvíc, Fundamentals of Power Electronics, 2nd ed., New York, NY, USA: Kluwer, 2011, ch.10.

A. M. Rahimi and A. Emadi, “Active damping in DC/DC power electronic converters: A novel method to overcome the problems of constant power loads,” IEEE Trans. Ind. Electron., vol. 56, no. 5, pp. 1428–1439, May 2009

M. WU and D. D. C. LU, “Active stabilization methods of electric power systems with constant power loads: A review,” J. Modern Power Syst. Clean Energy, vol. 2, no. 3, pp. 233–243, Aug. 2014

W. Du, J. Zhang, Y. Zhang, and Z. Qian, “Stability criterion for cascaded system with constant power load,” IEEE Trans. Power Electron. vol. 28, no. 4, pp. 1843–1851, Apr. 2013.

A. B. Jusoh, “The instability effect of constant power loads,” PECon 2004. Proceedings. National Power and Energy Conference, 2004. 29–30 November 2004; Kuala Lumpur, Malaysia. US: IEEE Press; 2005.

X. Lu, K. Sun, J. M. Guerrero, J. C. Vasquez, L. Huang, and J. Wang, “Stability enhancement based on virtual impedance for DC microgrids with constant power loads,” IEEE Trans. Smart Grid, vol. 6, no. 6, pp. 2770–2783, Nov. 2015.

B. A. Martínez-Treviño, A. E. Aroudi, H. Valderrama-Blavi, A. Cid-Pastor, E. Vidal-Idiarte, and L. Martinez-Salamero, “PWM nonlinear control with load power estimation for output voltage regulation of a boost converter with constant power load,” IEEE Trans. Power Electron., vol. 36, no. 2, pp. 2143–2153, Feb. 2021

A. Kwasinski and P. T. Krein, “Stabilization of constant power loads in dcdc converters using passivity-based control,” in Proc. Int. Teleco. Energy Conf., 2007, pp. 867–874.

Siew-Chong Tan, Member, Y. M. Lai, Member, and Chi K. Tse, Fellow, “Indirect sliding mode controller of power converter via double integral sliding surface”. IEE Trans. on power electronics, vol.23, no.2, march 2008

S. C. Tan, Y. M. Lai, and C. K. Tse, “A unified approach to the design of PWM based sliding mode voltage controller for basic DC-DC converters in continuous conduction mode,” IEEE Trans. Circuits Syst. I, vol. 53, no. 8, pp. 1816–1827, Aug. 2006.




DOI: https://doi.org/10.37591/joci.v14i2.7484

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Control & Instrumentation



eISSN: 2229-6972