DESIGN AND FABRICATION OF EFFLUENT TREATMENT PLANT

Authors

  • Umesh Acharya Department of Mechanical Engineering, Yenepoya Institute of technology, Moodbidri, Karnataka.
  • Kartik Naik Department of Mechanical Engineering, Yenepoya Institute of technology, Moodbidri, Karnataka.
  • Manish Naik Department of Mechanical Engineering, Yenepoya Institute of technology, Moodbidri, Karnataka.
  • Prajwal Naik Department of Mechanical Engineering, Yenepoya Institute of technology, Moodbidri, Karnataka.
  • Ajith Shetty Department of Mechanical Engineering, Yenepoya Institute of technology, Moodbidri, Karnataka.

DOI:

https://doi.org/10.37591/joeam.v10i2.2993

Keywords:

Waste water, Effluent, effluent treatment, pH

Abstract

Effluent water treatment plant works by removing sludge and bacteria from wastewater before releasing them into river. Several river basins are closed due to the excessive growth in the agricultural area, semi urbanization as well as in the industrialization. The performance of wastewater treatment plants for the treatment of small waste also does not meet the required standards. Effluent Treatment Plant (ETP) mainly consists of treatment tanks, clarifier, filter press and dual media filter, preliminary treatment, sludge removal and disposals, filtration and pH maintenance are the main methods to improve the performance of the effluent treatment plant to reduce the operating costs. The reuse of water for horticultural water system is frequently seen as a positive method for reusing water because of the potential substantial volumes of water that can be utilized. Reused water can have the benefit of being a consistent, dependable water source and diminishes the measure of water separated from the earth.

Downloads

Published

2019-08-27

Issue

Vol. 10 No. 2 (2019)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.