A Review on Aerodynamic Improvement of Vehicle
Abstract
The effect of air flow surrounding a vehicle-on-vehicle performance and fuel efficiency is studied. The
project's major goal is to reduce pollution, global warming causes, and energy consumption by
lowering the drag coefficient of road vehicles and thereby improve fuel economy. Aerodynamics is the
study of the air flow inside and around the body. Because air is a thin fluid, fluid dynamics is also used
to describe it. Speed, mileage, and handling are all affected by airflow. As a result, studying the airflow
around and through the body is required in order to construct the optimum car. The automobile is one
of the most important modes of transportation. The boot space is insufficient to accommodate the bags.
People usually use the roof to store extra luggage as a result of this difficulty. When a person adds a
roof box to the top of a car, the weight of the vehicle increases, resulting in increased fuel consumption.
Keywords
References
Howell, J., Sims-Williams, D., Sprot, A., Hamlin, F., and Dominy, R. (2012) Bluff body drag
reduction with ventilated base cavities, SAE International Journal of Passenger Cars-Mechanical
Systems, Vol.5(1), pp 152-160.
Khalighi, B., Chen, K. H., and Iaccarino, G. (2012) Unsteady aerodynamic flow investigation
around a simplified square-back road vehicle with drag reduction devices, Journal of Fluids
Engineering, Vol.134(6), 061101.
Khalighi, B., Balkanyi, S. R., and Bernal, L. P. (2013) Experimental investigation of aerodynamic
flow over a bluff body in ground proximity with drag reduction devices, International Journal of
Aerodynamics, Vol.3(4), pp217-233.
Wahba, E., Al-Marzooqi, H., Shaath, M., Shahin, M., and El-Dhmashawy, T. (2012) Aerodynamic
drag reduction for ground vehicles using lateral guide vanes, CFD Letters, Vol.4(2), pp68-79.
Marklund, J., Lofdahl, L., Danielsson, H., and Olsson, G. (2013) Performance of an automotive
under-body diffuser applied to a sedan and a wagon vehicle, SAE International Journal of Passenger
Cars-Mechanical Systems, Vol. 6(1), pp293-307.
Huminic, A., Huminic, G., and Soica, A. (2012) Study of aerodynamics for a simplified car model
with the underbody shaped as a venturi nozzle, International Journal of Vehicle Design, Vol.58(1),
pp15-32.
Kodali, S. P., and Bezavada, S. (2012) Numerical simulation of air flow over a passenger car and
the Influence of rear spoiler using CFD, International Journal of Advanced Transport Phenomena,
Vol. 01(1), pp.6-13.
Daryakenari, B., Abdullah, S., Zulkifli, R., Sundararajan, E., and Sood, A. M. (2013) Numerical
study of flow over Ahmed body and a road vehicle and the change in aerodynamic characteristics
caused by rear spoiler, International Journal of Fluid Mechanics Research, Vol.40(4), pp354-372.
Hu, X. X., and Wong, T. T. (2011) A numerical study on rear-spoiler of passenger vehicle, World
Academy of Science, Engineering and technology, Vol. 57, pp636-641.
FourriƩ, G., Keirsbulck, L., Labraga, L., and GilliƩron, P. (2011) Bluff-body drag reduction using
deflector, Experiments in Fluids, Vol.50(2), pp385-395.
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Journal of Experimental & Applied Mechanics