A Finite Element Solution of Functionally Graded Rotating Disk based on Element based Material Grading
Keywords:
Functionally graded material (FGM), Linear elastic analysis, Annular rotating disk, Variable thickness rotating disk, Finite element method (FEM)Abstract
The present study reports finite element elastic analysis of variable thickness rotating disks made up of functionally graded materials (FGMs). The disks have exponentially varying material properties along the radius, which is achieved by varying the volume fraction ratio. Three types of thickness profile namely uniform, linearly varying and concave thickness profile having constant mass are analyzed and the resulting displacement and stresses are
evaluated for free-free boundary condition. The investigation is carried out using element based grading of material properties on the discretized elements. A comparison of displacement and stresses for uniform thickness disk and variable thickness disk is made
which shows that in a rotating disk, the displacement and stress fields can be controlled by varying the thickness of the disk.
Cite this Article
Amit Kumar Thawait, Lakshman
Sondhi. A Finite Element Solution of
Functionally Graded Rotating Disk
based on Element based Material
Grading. Journal of Experimental &
Applied Mechanics. 2016; 7(2): 41–47p.
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |