|
Issue |
Title |
|
Vol 13, No 1 (2022) |
Design and Analysis of an Upright |
Abstract
|
Amey Sawant, Siddharth Rahate, Deepak Yadav, Pranit Patil |
|
Vol 8, No 2 (2017) |
Design and Analysis of Single Angle Expanding Collets |
Abstract
PDF
|
Viral B. Mevcha, Chetankumar M. Patel |
|
Vol 9, No 1 (2018) |
Design and Analysis of Taper Roller Bearing - A Review |
Abstract
|
Nilesh M Makawana |
|
Vol 9, No 2 (2018) |
Design and Analysis of The Supporting Frame Structure of Cold Aggregate Feeder Unit of Asphalt Mixing Plant |
Abstract
|
Bhargav Pipaliya, Shivang S. Jani, G.D. Acharya, Ravi C. Patel |
|
Vol 11, No 3 (2020) |
Design and Comparative Analysis of UAV Body Prototype with ABS and CF + ABS as Structural Materials |
Abstract
|
Rutwik R. Dehade, Kevin M. Bhajiwala, Harsh Y. Asmaniwala, Shailesh D. Chaudhari, Parth P. Lakdiwala, Vijay Radadiya, Brijesh Ghadiya |
|
Vol 12, No 2 (2021) |
Design and development of experimental setup for measurement of velocity by using Pitot tube |
Abstract
|
Shubham Pandurang Davar |
|
Vol 10, No 2 (2019) |
DESIGN AND FABRICATION OF EFFLUENT TREATMENT PLANT |
Abstract
|
Umesh Acharya, Kartik Naik, Manish Naik, Prajwal Naik, Ajith Shetty |
|
Vol 13, No 3 (2022) |
DESIGN AND FABRICATION OF EVACUATED TUBE - SOLAR WATER HEATER |
Abstract
|
Ritesh Vatke, Raju Vadiva, Kamlesh Parte, Durgesh Uikey |
|
Vol 11, No 2 (2020) |
Design and Fabrication of Pesticide Sprayer for Agriculture |
Abstract
|
Swapnil Bhosale, Onkar Jagdale, Sajan Patil, Prashant Anpat, Abhijit Kamthe |
|
Vol 11, No 2 (2020) |
Design and Fabrication of Rice Seedling Plantation Machine |
Abstract
|
Chetan Mokal, Ajay Mukadam, Praful Rathod, Suraj Patil, Pramod Maurya |
|
Vol 11, No 1 (2020) |
Design of Centrifugal Fan Impeller and Comparison with Industry Design: A Case Study |
Abstract
|
K. Anantharaman, Kumaresan T., B. Balakrishna, B. Thileeban, J. Anish Ahamed, K.S. Arieesh Rajan |
|
Vol 13, No 1 (2022) |
Design of Secure Biometric-Based Access Mechanism for Cloud Services |
Abstract
|
K Vijay, K. Nagaraju, Y. Chetan |
|
Vol 10, No 2 (2019) |
Development and Characterization of Aluminum Alloy Reinforced with Hematite Particulate Composite for Automotive Application |
Abstract
|
Sunil Kumar M, Sathisha N., Batluri Tilak Chandra |
|
Vol 6, No 3 (2015) |
Drilling Effect on Fiber Composites: A Review |
Abstract
|
MB Maniyar, KD Kothari |
|
Vol 9, No 3 (2018) |
Dynamic Analysis of Isotropic Annular Plate using Finite Element Method |
Abstract
|
Yogendra S. Yadav, Manoj Narwariya, Avadesh K. Sharma, Adviteeya Gupta |
|
Vol 13, No 3 (2022) |
Effect of Hardfacing on Mechanical Properties |
Abstract
|
Jaswant Singh, Dinesh Kumar Shukla |
|
Vol 9, No 3 (2018) |
Effect of Ni Addition on the Hardness and Tensile Strength of Al – Cu Alloy Prepared by Powder Metallurgy Technique |
Abstract
|
Yadvendra kumar Mishra, Arun Kumar Singh, Dharmendra Singh, Gashaw Getenet |
|
Vol 8, No 3 (2017) |
Effect of Post Weld Heat Treatment on Mechanical Properties and Microstructure of P11 Weld: A Review |
Abstract
PDF
|
Amit R. Patel, G.D. Acharya |
|
Vol 10, No 1 (2019) |
Effect of PWHT Cycle on Microstructure and Mechanical Properties of 1.25Cr-0.5Mo Weld |
Abstract
|
Amit R. Patel |
|
Vol 8, No 1 (2017) |
Effect of Steel Slag and Bagasse Ash on Strength of Concrete |
Abstract
|
Rajesh Lalsing Shirale, Keshav Raghunath Kale, Ajay Gulabrao Dahake |
|
Vol 9, No 3 (2018) |
Emission Analysis Of Butanol and Waste Cooking Oil in VCR Diesel Engine |
Abstract
|
Nathi Ram Chauhan, Shivangi Sarabhai, Deepal Khatri, Chetna Dagar, Manish Saraswat |
|
Vol 9, No 3 (2018) |
Emission Analysis Of Butanol and Waste Cooking Oil in VCR Diesel Engine |
Abstract
|
Nathi Ram Chauhan, Shivangi Sarabhai, Deepal Khatri, Chetna Dagar, Manish Saraswat |
|
Vol 9, No 1 (2018) |
Estimation of Heat Transfer Rate with Conjugate Gradient Method |
Abstract
|
Dilip S. Patel, Kedar A. Pathak |
|
Vol 9, No 2 (2018) |
Evaluation of the effect of fuel preheat on the performance and emission of a diesel engine using regression analysis. |
Abstract
|
R Seetharamaiah, A.S. Ravindran, S.M. Gopinath, B. Manjunatha, A. Sathyanarayana Swamy |
|
Vol 9, No 2 (2018) |
EXPERIMENTAL ANALYSIS OF STEELS ON HARDNESS IN ELECTRICAL DISCHARGE MACHINING |
Abstract
|
Vipul V. Mahindrakar, Sourabh S. Kulkarni |
|
26 - 50 of 118 Items |
<< < 1 2 3 4 5 > >> |