Sustainable Manufacturing Process: New Trends in Manufacturing

Authors

  • K.V. Parmar Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, Gujarat, India
  • M.A. Lakhwani

DOI:

https://doi.org/10.3759/joise.v3i1.3509

Abstract

The main purpose of this article is to review the relevant literature in sustainable machining. Sustainability means optimizing techniques at the product, process and system levels. Sustainability can be improved by design for environment, design for safety, and design for natural resource. An overview of current trends and new conceptions in the evolving of sustainable product for sustainable manufacturing processes will be presented. This paper shows general awareness about the maximum use of sustainable product in all manufacturing process in industries with sustainability.

References

Haapala et al. A Review of Engineering Research in Sustainable Manufacturing. Journal of Manufacturing Science and Engineering. Aug 2013; 135(4): 135/041013.

Jones H. Douglas Scott: International Tribology- The Practical Aspect of Friction, Lubrication and Wear. Elsvier Scientific Publishing Company, Oxford, New York, ISBN 0-444-42161-0. 2015; 10(3): 121–125p.

Skerlos et al. Current Advances in Sustainable Metalworking Fluids Research. Int. J. Sustainable Manufacturing. 2008; 1: 1–2p.

Fan et al. An Investigation of Indicators for Measuring Sustainable Manufacturing, Member, IEEE. 2015; 105: 74–85p.

Negin A. A Review of Current Trend in Design for Sustainable Manufacturing. IOSR Journal of Mechanical and Civil Engineering. Ver. II, Jul-Aug 2014; 11(4): 53–58p.

PUŠAVEC et al. Sustainable Machining Process- Myth or Reality. Strojarstvo. 2010; 52(2): 197–204p.

Jayal et al. Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels. CIRP Journal of Manufacturing Science and Technology. 2010; 2: 144–152p.

Janez K, Franci P et al. Concepts Of Sustainable Machining Processes. 13th International Research/Expert Conference. Trends in the Development of Machinery and Associated Technology’ TMT. 2009.

Jawahir IS. Sustainable Manufacturing: The Driving Force for Innovative Products, Processes and Systems for Next Generation Manufacturing. Institute for Sustainable Manufacturing (ISM). 2014.

Jawahir IS, Badurdeen F, Rouch KE, et al. Innovation in sustainable manufacturing education. 11th Global Conference on Sustainable Manufacturing. 2013’ 153–158p.

Rachuri et al. Sustainable Manufacturing: Metrics, Standards, and Infrastructure-Workshop Report NISTIR. 2010; 76–83p.

Valivullah et al. Manufacturing Process Information Models for Sustainable Manufacturing. MSEC2014-4105. V001T05A005; 8p.

Cathy AR. Green Manufacturing: An Evaluation of Environmentally Sustainable Manufacturing Practices and Their Impact on Competitive Outcomes. IEEE Transactions On Engineering Management. Aug 2007; 54(3): 445–454p.

Jagadish, Amitava R. Cutting Fluid Selection for Sustainable Design for Manufacturing: an Integrated Theory. 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014). 2014; 6: 450–459p.

Downloads

Published

2019-11-18

Issue

Vol. 3 No. 1 (2016)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.