Minimization of Effluent Produced by Electrical Industry

Authors

  • Gayatri Mahadu Mete
  • Snehal Anil Marathe
  • Saurabh Narayan Sase
  • Komal Ajabrao Gadekar
  • Shubham Sanjay Dhok
  • Charudatta Prakash Thosar

DOI:

https://doi.org/10.37591/joise.v8i1.5538

Abstract

There are two fundamental reasons of effluent viz. prevention pollution and thereby protecting the environmental and protecting the public health by safe guarding waste supplies and preventing the spread of water borne diseases. When untreated industrial waste water is discharge it will contaminate the natural water body i.e., river, lake with hazardous chemicals. It is absolutely necessary to study the characteristic of industrial waste water, to ensure its safe disposal. These studies will help in determination the degree the type of treatment required to given waste water this avoid the pollution of sources of its disposal. Effluent produced from electronics industry is from pre-treatment of galvanized steel surface prior to the application of powder coating. Company having an In-house facility of 10 tank process for phosphating of panel for purpose of degreasing, oxidation, and oil removal. The waste water treatment plant it has been designed with Electrocoagulation treatment unit.

Keywords: Prevention, diseases, waste water, hazardous, pollution, disposal, electrocoagulation treatment unit.

Downloads

Published

2021-05-24

Issue

Vol. 8 No. 1 (2021)

Section

Review Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.