REVIEW PAPER ON ABRASIVE MACHINING PROCESS

Authors

  • Ravi Kant
  • Dr P Sudhakar Rao

DOI:

https://doi.org/10.37591/joma.v5i3.1486

Keywords:

Surface Texture, Grinding Forces, Parameterization in Granite, Finite Element Analysis, Simulation, Magnetic Abrasive Finishing, Material Removal Rate, Optimization

Abstract

Abrasive Machining is the most important process for material removal in the industries. It refers to the action of removing the fibres from a surface. It requires a deep study to obtain a better understanding of the variables that affect the material removal rate, quality of surface & power consumption. Various experiments are designed to determine the impact of interface pressure, belt speed, surface roughness for different grit sizes. A relation is created between grinding forces & material’s resistance to microstructure. Magnetic forces are also applied as a pressure for proper finishing of surfaces. Coordinated system is created by applying theory of face gear’s teeth surface.

Downloads

Published

2019-01-03

Issue

Vol. 5 No. 3 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.