To Study the Effect of Change in Pressure and Temperature on Performance of Reverse Osmosis Process

Authors

  • Yash Bhayani Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat
  • Rajgiri Goswami Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat
  • Vivek Vadodariya Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat
  • Savan Gohel Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat
  • Jiten J. Makadia Department of Mechanical Engineering, V.V.P. Engineering College, Rajkot, Gujarat

DOI:

https://doi.org/10.37591/joma.v6i1.2608

Abstract

Day-by-day population is increasing and this increasing population leads to some problems one of them being availability of pure and usable water. As population is increasing, demand for pure water is increasing and the water resources are limited, in fact resources are depleting. This demands to find out some new ways to save water. One of source of wastage of water is the brine rejection from Reverse Osmosis process and most of the houses use reverse osmosis desalination process for filtration of water and the amount of rejection sums up to great deal. We have observed that while installation of the domestic RO system the technician does not check the parameters of feed water just installs the general system which is applicable for all type of water. This results in poor recovery of water. So we have conducted some experiments keeping in control the working parameters of RO system and recorded the performance of the system at these working parameters. From the data recorded by experiments we observe many things and also can find out a combination which gives less brine rejection.

References

Yash Bhayani, Rajgiri Goswami, Vivek Vadodariya, Savan Gohel, Jiten J. Makadia. To Study the Effect of Change in Pressure and Temperature on Performance of Reverse Osmosis Process. Journal of Mechatronics and Automation. 2019; 6(1): 37–40p.

Downloads

Published

2019-05-28

Issue

Vol. 6 No. 1 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.