Design, Analysis and Optimization of 10 Ton Hydropneumatic Press Machine

Authors

  • Akshay A. Desai Student, Department of Mechanical Engineering, KLS Gogte Institute of Technology, Karnataka
  • Pratik Phadnis Assistant Professor, Department of Mechanical Engineering, KLS Gogte Institute of Technology, Karnataka
  • Shriranganath Avadhani Assistant Professor, Department of Mechanical Engineering, KLS Gogte Institute of Technology, Karnataka
  • Manjunath G. A Assistant Professor, Department of Mechanical Engineering, KLS Gogte Institute of Technology, Karnataka,

DOI:

https://doi.org/10.37591/joma.v6i2.3344

Keywords:

Hydropneumatic presses, compressed air, pneumatic power press

Abstract

The main aim is to reduce the cost of the hydropneumatic presses and equipment without compromising on the quality of the output and using the optimum resources possible in designing the hydropneumatic presses and equipment. One way of doing it will be the optimizing the volume of material utilized for building the structure. An attempt has been made in this direction to reduce the volume of material. So here we consider an industrial application project consisting of mass minimization of hydropneumatic press. This hydropneumatic press has to compensate the forces acting and has to fulfill certain critical constraints. CAE software has been used for this analysis which uses finite element method for solution.

References

Akshay A. Desai, Pratik Phadnis, Shriranganath Avadhani, Manjunath G.A. Design, Analysis and Optimization of 10 Ton Hydropneumatic Press Machine. Journal of Mechatronics and Automation. 2019; 6(2): 6–11p.

Downloads

Published

2019-09-12

Issue

Vol. 6 No. 2 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.