Fabrication of 3D Printer

Authors

  • Milind Khamkar Department of Mechanical Engineering, Saraswati College of Engineering, Navi Mumbai, Maharashtra, India
  • Shrikant Gaikwad Department of Mechanical Engineering, Saraswati College of Engineering, Navi Mumbai, Maharashtra, India
  • Vijay Hegishte Department of Mechanical Engineering, Saraswati College of Engineering, Navi Mumbai, Maharashtra, India
  • Aditya Bhoir Department of Mechanical Engineering, Saraswati College of Engineering, Navi Mumbai, Maharashtra, India
  • D.D. Baviskar Department of Mechanical Engineering, Saraswati College of Engineering, Navi Mumbai, Maharashtra, India

Keywords:

3D Printer, Rapid prototyping, 3D Model

Abstract

This article gives us a insight about 3D printer technology considering its concepts, history and technology of a 3D printer. The major points covered in this article are Introduction of 3D printer, background, problem statement and scope of 3D printer. The printing process involves creating of a 3-dimensional model, converting it into. STL file, slicing it, feeding the stl file to the 3D printer and the final printing process done in the layer by layer of the virtual model. The reason of this project is to fabricate the 3D model and utilizing it using normal 3D software such as Inventor.

References

ASADOLLAHI-YAZDI,Elnaz; GARDAN, Julien; LAFON, Pascal. Toward integrated design of additive manufacturing through a process development model and multi-objective optimization. The International Journal of Advanced Manufacturing Technology, v. 96, n. 9-12, p. 4145- 4164, 2018.

BATURYNSKA, Ivanna. Statistical analysis of dimensional accuracy in additive manufacturing considering STL model properties. The International Journal of Advanced Manufacturing Technology, p. 1- 15, 2018.

BAUMANN, Felix W.; KOPP, Oliver; ROLLER, Dieter. Abstract API for 3D printing hardware and software resources. The International Journal of Advanced Manufacturing Technology, v. 92, n. 1-4, p. 1519-1535, 2017.

BIKAS, H.; S TAVROPOULOS , Panagiotis; CHRYSSOLOURIS , George. Additive manufacturing methods and modelling approaches: a critical review. The International Journal of Advanced Manufacturing Technology, v. 83, n. 1-4, p. 389-405, 2016.

BROOKS, Byron James et al. Robot-assisted 3D printing of biopolymer thin shells. The International Journal of Advanced Manufacturing Technology, v. 89, n. 1-4, p. 957-968, 2017.

CAVIGGIOLI, Federico; UGHETTO, Elisa. A bibliometric analysis of the research dealing with the impact of Additive Manufacturing on industry, business and society. International Journal of Production Economics, 2018.

CHEKUROV, Sergei et al. The perceived value of additively manufactured digital spare parts in industry: An empirical investigation. International Journal of Production Economics, v. 205, p. 87-97, 2018.

CHAI, Yuan et al. Laser polishing of thermoplastics fabricated using fused deposition modelling. The International Journal of Advanced Manufacturing Technology, p. 1-8, 2018.

J. M. Pearce, C.M. Blair, K.J. Laciak, R. Andrews, A. Nosrat, and I. Zelenika-Zovko, “3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development,” Journal of Sustainable Development', 3(4), 17-29, 2010.

Downloads

Published

2020-10-06

Issue

Vol. 7 No. 2 (2020)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.