Optimization of Multiple Responses in Turning of AA7075 Using Taguchi’s Quality Loss Method

Authors

  • Maheswara Rao ANITS college of engineering, Assistant Professor

DOI:

https://doi.org/10.37591/joma.v5i1.665

Abstract

The present work is to explore the affect of turning parameters, speed, feed and depth of cut on the multiple performances of Material Removal Rate and Surface Roughness characteristics. AA7075 is considered as the work piece as it has extensive applications in the field of aerospace and marine sectors. The experiments are carried out using tungsten carbide tool of 0.4 nose radius and as per the standard Taguchi’s L9 Orthogonal array. A multi objective optimization method called Taguchi’s total quality loss and ANOVA are used for analyzing the multiple responses. From the results the optimal combination of control parameters for achieving the minimum combined quality loss is found at 2000 rpm, 0.2 mm/rev and 1 mm respectively.

Author Biography

Maheswara Rao, ANITS college of engineering, Assistant Professor

ANITS college of engineering, Mechanical Department, Assistant Professor.

Downloads

Published

2018-06-12

Issue

Vol. 5 No. 1 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.