Automatic Tiles Unloading Mechanism: A Review

Authors

  • Shirish Thoriya Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, India
  • P J Mandaliya Department of Mechanical Engineering, Atmiya Institute of Technology and Science, Rajkot, India

DOI:

https://doi.org/10.37591/joma.v3i1.7234

Keywords:

Unloading of tiles, manufacturing process, automation, productivity, ceramic

Abstract

In the era of Ceramic Industries Manufacturing process is done through automatic machines but in Ceramic industries where use manually unloading of Tiles from Kiln. Productivity improvement is the need of current market. This project is based on automatic Tiles unloading Mechanism and to create Design of Mechanism and Simulation of this Mechanism and I will make significant efforts to make attempt to solve challenges in manual tiles unloading system. I will give the automation to Tiles unloading process and improve the work efficiency and also reduce the human effort

References

Ghazi Abu Taher, Yousuf Howlader, Md. Asheke Rabbi, Fahim Ahmed Touqir. Automation of Material Handling with Bucket Elevator and Belt Conveyor. International Journal of Scientific and Research Publications. 2014; 3(4):225p.

Vivek A Bandebuche, Tidke DJ. Parts Handling Systems for Machine Shops of Small and Medium Enterprises. International Journal of Engineering Research and General Science. 2013; 1(2): 332p.

Jins Joy P, Radhakrishnan R. A Study on Causes of Work Stress among Tile Factory Workers in Kannur District in Kerala. International Journal of Scientific and Research Publications, 2013; 3(9) 54p.

Nathan King, Martin Bechthold, Anthony Kane, Panagiotis Michalatos. Robotic Tile Placement: Tools, Techniques and Feasibility. International Journal of Scientific and Research Publications. 2013.

Germano Veiga, Pedro Malaca, Rui Cancela. Interactive Industrial Robot Programming for the Ceramic Industry. International Journal of Advanced Robotic Systems. 2013.

Mei-Hor Lo, Dechang Han. Exploring Competitive Strategies of China Ceramic Tile Industrial Cluster in Global Economy. Open Journal of Social Sciences. 2013.

Matthew J Patitz. Simulation of Self Assembly in the Abstract Tile Assembly Model with ISU TAS. Open Journal of Social Sciences. 2010.

Mohd Aizat B, Mohd Azizan. Design and Prototype Loading and Unloading Mechanism for automated Guided Vehicle. Open Journal of Social Sciences. 2009.

Elbehiery HM, Hefnawy AA, Elewa MT. Visual Inspection for Fired Ceramic Tile’s Surface Defects using Wavelet Analysis. ICGST-GVIP Journal, 2005; 5(2) 66p..

Bouguerra H, Andreasson A, Astrand T. An Autonomous Robotic System for Load Transportation. Open Journal of Social Sciences. 2005.

Stefan Blomkvist, Inger Boivie, Masood Masoodian, Jenny Persson. From Piles to Tiles: Designing for Overview and Control in Case Handling Systems. International Journal of Scientific and Research Publications. 2004.

Rubén Ruiz, Concepción Maroto. Flexible Manufacturing in the Ceramic Tile Industry. International Journal of Scientific and Research Publications, 2002.

Jaap A Ottjes, Hans PM Veeke. Simulation of a New Port-Ship Interface Concept for Inter Modal Transport. International Journal of Scientific and Research Publications, 2000.

C Boukouvalas, J Kittler, R Marik, et al. Ceramic Tiles Inspection for Color and Structural Defects.Open Journal of Social Sciences, 1996.

Hannu Lehtinen, Lauri Koskela, Hannu Sainio, Mika Matikainen,et al. Development of Mobile Tile Cladding Robot System. International Journal of Scientific and Research Publications, 1992.

Abraham, Seidmann, Ami Arbel, Reuven Shapira. A Two-Phase Analytic Approach to Robotic System Design. Robotics & Computer-Integrated Manufacturing, 1984; 1(2), 181-190p.

Downloads

Published

2023-07-31

Issue

Vol. 3 No. 1 (2016)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.