Open Access Open Access  Restricted Access Subscription or Fee Access

Application of RSM on Performance Characteristics in Turning of Hard Porcelain Material

Saurabh Agrawal, Manoj Kumar Gaur, Dinesh Kumar Kasdekar, Sharad Agrawal

Abstract


This paper presents the effect of cutting parameters on Bending and Voltage during turning of Hard Porcelain Material on CNC turning machine (SINUMERIK802D). In this work, all the cutting parameters namely, Spindle speed, feed rate, angle of cut and depth of cut are modelled using Response surface methodology (RSM). The impact of all the cutting parameters on the Response parameters (Bending and Voltage) is examined. Finally, the result of developed mathematical model is examined by ANOVA. From the basis of experimented results, it indicates that the Spindle speed and depth of cut is the leading parameters that affect the Bending of material. Similarly, Spindle speed, feed rate and depth of cut are the leading parameters that affect the Voltage of material. This effect can be diminished when the effected parameters were kept at the lower level, while other parameters were kept at the highest level. The effect of quadratic and pairwise interactions of parameters was found to be insignificant.

 


Keywords


Hard turning, machining parameters, RSM, ANOVA

Full Text:

PDF

References


Wang Z, Meng H, Fu J. Novel method for evaluating surface roughness by grey dynamic filtering, Journal of Measurement. 2010; 43: 78–82p.

Ilhan Asilturk, Suleyman Neseli, Multi response optimization of CNC turning parameters via Taguchi Method-based response surface analysis, Journal of Measurement, 2012; 45: 785–794p.

Mahapatra SS, Patnaik A, Patnaik P. Parametric analysis and optimization of cutting parameters for turning operations based on Taguchi method, In: Proceedings of the Int. Conference on Global Manufacturing and Innovation. 2006, 1–6p.

Gupta MK, Singh G, Sood P. Modelling and optimization of Tool wear in Machining of EN24 steel using Taguchi Approach, The Institute of Engineers, 2015.

Adem Cicek, Turgay Kivak, Ergun Ekici, Optimization of drilling parameters using Taguchi technique and response surface methodology (RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills, Springer Science, 2013.

Senthilkumar N, Tamizharasan T, Gobikannan S. Application of Response Surface Methodology and Firefly Algorithm for Optimizing Multiple Responses in Turning AISI 1045 Steel, Springer Science. 2014.

Manimaran G, Pradeep M Kumar, Venkatasamy R. Influence of cryogenic cooling on surface grinding of stainless steel 316. Cryogenics. 2014; 59: 76–83p.

Carmita Camposeco-Negrete, Optimization of cutting parameters using Response Surface Method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum, Elsevier. 2014; 1-9p.

Latha B, Senthilkumar VS. Modeling and analysis of surface roughness parameters in drilling GFRP composites using fuzzy logic, Journal of Materials and Manufacturing Processes. 2010; 25: 817–827p.

Palanikumar K. Modeling and analysis of delamination factor and surface roughness in drilling GFRP composites, Journal of Materials and Manufacturing Processes. 2010; 25: 1059–1067p.

Sun H, Lee S. Response surface approach to aerodynamic optimization design of helicopter rotor blade, International Journal for Numerical Methods in Engineering. 2005; 64: 125–142p.

Correia AE, Davim JP. Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts, Journal of Measurement. 2011; 44: 1000–1005p.

Liveira OJFG et al. Industrial challenges in grinding, Annals of the CIRP, 2009; 1-18p.

Doman DA, Warkentin A and Bauer R. International Journal of Machine Tools & Manufacture. 2006, 46: 343–352p.

Aloufi M, Kazmierski TJ. A response surface modelling approach to performance optimisation of kinetic energy harvesters, IJRRCS Simulation. Benchmarking and Modeling of Systems and Communication Networks.2011; 1–8p.

Gaitonde VN, Karnik SR, Faustino M, Davim JP. Machinability analysis in turning tungsten–copper composite for application in EDM electrodes, Int. J. Refract. Metals Hard Mater. 2009; 27: 754–763p.

Kathleen MC, Natalia YK, Jeff R. Centre for computational analysis of social and organizational systems (CASOS), Technical Report, 2004.

Myers RH, Douglas CM, Anderson-Cook CM. Process and Product Optimization Using Designed Experiments, 3rd ed., John Wiley & Sons, 2009.

Kaymaz I, McMahon CA. A response surface method based on weighted regression for structural reliability analysis, Journal of Probabilistic Engineering Mechanics. 2005; 20:11–17p.

Süleyman Nes_eli, Süleyman Yaldız, Erol Türkes, Optimization of tool geometry parameters for turning operations based on the response surface methodology, Journal of Measurement, 2010.

Bouacha K, Yallese MA, Mabrouki T, Rigal JF. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool, Int. J. Refract. Metals Hard Mater. 2010; 28: 349–361p.




DOI: https://doi.org/10.37591/joma.v2i2.7271

Refbacks

  • There are currently no refbacks.