Improved Unified Power Quality Conditioner Design and Numerical Simulation For Power Quality Improvement
Abstract
Harmonic currents can distort the waveform voltage, resulting in a weak signal. There is also an increase in the number of loads requiring enough sinus tension to function properly. As electronic devices become more power-sensitive, people are becoming increasingly interested in power conditioning solutions. Therefore, if the amount of electricity being generated falls below a certain threshold, some type of compensation must be provided. Unified Power Quality Controller (UPQC) is an AC Transmission System family capable of managing voltage, impedance and phase angle during transmission. UPQC (FACTS). It is necessary to enhance the power system's power quality by employing a Dynamic Voltage Restorer, a Fuzzy Controlled Shunt Active Power Filter, and a UPQC. DVRs (Dynamic Voltage Restorers) are power converters fitted in responsive load arrays that give protection against disruptions on the supply side. It is a fantastic tool for improving the quality of electrical power because of its quick response time and high level of dependability. In order to illustrate the efficiency of the proposed system, the simulation results were compared to the basic system and enhanced.
Keywords
Full Text:
PDFReferences
Toshifiimi Ise, Yusuke Hayashi and Kiichiro Tsuji, “Definitions of Power Quality Levels and the Simplest Approach for Unbundled Power Quality Services”, IEEE Proceedings of Ninth International Conference on Harmonics and Quality of Power, vol.-2, pp. 385 - 390, 2000.
Roger C.Dugan, Mark F. McGranaghan, Surya Santoso and H.Wayne Beaty, “Electrical Power Systems Quality”, The McGraw-Hill, Second Edition, 2004.
K.R.Padiyar, “Facts Controllers in Power Transmission and Distribution”, New Age International Publishers, 2007.
Alexander Kusko, Sc.D. and Marc T.Thompson, “Power Quality in Electrical Systems”, McGraw-Hill, 2007.
Swati Pal, Pallavi Singh Bondriya and Yogesh Pahariya, “MATLAB-Simulink model based Shunt Active Power Filter using Fuzzy Logic Controller to Minimize the Harmonics”, International Journal of Scientific and Reserch Publications, vol.-3, no.-12, pp. 2250-3153, December 2013.
N.G.Hingorani, “Introducing Custom Power”, IEEE Spectrum, vol.-32, no.-6, pp. 41-48, June 1995.
Arindam Ghosh and Gerard Ledwhich, “Power Quality Enhancement Using Custom Power Devices”, Kluwer Academic Publishers, 2002.
Angelo Baggini, “Handbook of Power Quality”, John Wiley & Sons Ltd, 2008.
T.A.Short, “Distribution Reliability and Power Quality”, Taylor & Francis Group, CRC Press, 2006.
Afshin Lashkar Ara and Seyed Ali Nabavi Niaki,“Comparison of The Facts Equipment Operation In Transmission and Distribution Systems”, 17th International Conference on Electricity Distribution Barcelona, Session No.2, Paper No.44, pp. 12-15 May 2003.
Juan W. Dixon, Gustavo Venegas and Luis A. Mor´an, “A Series Active Power Filter Based on a Sinusoidal Current-Controlled Voltage-Source Inverter”, IEEE Transactions on Industrial Electronics, vol.-44, no.-5, pp. 612-620, October 1997.
T.Devaraju, V.C.Veera Reddy and M. Vijay Kumar, “Modeling and Simulation of Custom Power Devices to Mitigate Power Quality Problems”, International Journal of Engineering Science and Technology, vol.-26, pp. 1880-1885, 2012.
Mahesh Singh and Vaibhav Tiwari, “Modeling analysis and solution of Power Quality”, 10th International Conference on Environment and Electrical Engineering, July 2011.
Yun Wei Li, D.Mahinda Vilathgamuwa, Poh Chiang Loh and Frede Blaabjerg, “A Dual- Functional Medium Voltage Level DVR to Limit Downstream Fault Currents” IEEE Transactions on power electronics, vol.-22, no.-4, July 2007.
Pedro Roncero-Sanchez, Enrique Acha, Jose Enrique Ortega-Calderon, Vicente Feliu, and Aurelio García-Cerrada,“A Versatile Control Scheme for a Dynamic Voltage Restorer for Power-Quality Improvement”, IEEE Transactions on power delivery, vol.-24, no.-1, January 2009.
Rajan Sharma, Parag Nijhawan, “Effectiveness of DSTATCOM to Compensate the Load Current Harmonics in Distribution Networks under Various Operating Conditions”, International Journal of Scientific Engineering and Technology, vol.-2, no.-7, pp. 713- 718, July 2013.
Parag Nijhawan, Ravinder Singh Bhatia, Dinesh Kumar Jain, “Improved performance of multilevel inverter-based distribution static synchronous compensator with induction furnace load”, IET Power Electronics, vol.-6, no.-9, pp. 1939-1947, 2013.
Rajan Sharma and Parag Nijhawan, “Role of DSTATCOM to Improve Power Quality of Distribution Network with FOC Induction Motor Drive as Load”, International Journal of Emerging Trends in Electrical and Electronics (IJETEE - ISSN: 2320-9569), vol.-5, no.-1, July 2013.
Parag Nijhawan, Ravinder Singh Bhatia, Dinesh Kumar Jain, “Application of PI controller based DSTATCOM for improving the power quality in a power system network with induction furnace load”, Songklanakarin J. Sci. Technology, vol.-2, no.-34, pp. 195-201, March-April 2012.
Parag Nijhawan, Ravinder Singh Bhatia, Dinesh Kumar Jain, “Role of DSTATCOM in a power system network with induction furnace load”, IEEE 5th Power India Conference, Dec.19-22, 2012.
Ankush Malhar and Parag Nijhawan, “Improvement of Power Quality of Distribution Network with DTC Drive Using UPQC”, International Journal of Emerging Trends in Electrical and Electronics (IJETEE ISSN: 2320-9569), vol.-5, no.-2, July-2013.
R.N.Bhargavi, “Power Quality Improvement Using Interline Unified Power Quality Conditioner”, 10th International Conference on Environment and Electrical Engineering (EEEIC), pp. 1-5, 2011.
K. Palanisamy, J Sukumar Mishra, I. Jacob Raglend and D. P. Kothari, “Instantaneous Power Theory Based Unified Power Quality Conditioner (UPQC)”, 25 Annual IEEE Conference on Applied Power Electronics Conference and Exposition (APEC), pp. 374 -379, 2010.
G.O. Suvire, P.E. Mercado, “Combined control of a distribution static synchronous compensator/flywheel energy storage system for wind energy applications”, IET Generation, Transmission & Distribution, vol.-6, no.-6, pp. 483-492, 2012.
G. Siva Kumar, P. Harsha Vardhana and B. Kalyan Kumar, “Minimization of VA Loading of Unified Power Quality Conditioner (UPQC)”, Conference on POWERENG 2009 Lisbon, Portugal, pp:552-557, 2009.
V. Khadkikar, A. Chandra, A.O. Barry and T.D. Nguyen, “Power quality enhancement utilising single-phase unified power quality conditioner: digital signal processor-based experimental validation”, Conference on Power Electronics, vol.-4, pp. 323 -331, 2011.
V. Khadkikar, A. Chandra, A.O. Barry and T.D.Nguyen, "Application of UPQC to Protect a Sensitive Load on a Polluted Distribution Network", IEEE PES General Meeting, 2006.
Metin Kesler and Engin Ozdemir, “A Novel Control Method for Unified Power Quality Conditioner (UPQC) Under Non-Ideal Mains Voltage and Unbalanced Load Conditions”, 25th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 374-379, 2010.
A.Kazemi, A.Mokhtarpour, and M.Tarafdar Haque, “A New Control Strategy for Unified Power Quality Conditioner (UPQC) In Distribution Systems”, Conference on Power System Technology, pp. 1-5, 2006.
Luis F.C. Monteiro, Mauricio Aredes and Joao A. Moor Neto “A Control Strategy for Unified Power Quality Conditioner”, IEEE International Symposium on Industrial Electronics, vol.-1, pp. 391-396, 2003.
Morris Brenna and Roberto Fara Enrico Tironinda, “A New Proposal for Power Quality and Custom Power Improvement OPEN UPQC”, IEEE Transactions on Power Delivery, vol.-24, pp. 2107-2116, 2009.
Sai Shankar, Ashwani Kumar and W. GAO, “Operation of Unified Power Quality Conditioner under Different Situations”, IEEE Power and Energy Society General Meeting, pp. 1-10, 2011.
M.Vasudevan, R.Arumugam and S.Paramasivam, “High Performance Adaptive Intelligent Direct Torque Control Schemes for Induction Motor Drives”, Serbian journal of Electrical Engineering, vol.-2, no.-1, pp. 93-116, May 2005.
Jiangyuan Le, Yunxiang Xie, Zhang Zhi and Cheng Lin, “A Nonlinear control strategy for UPQC”, International Conference on Electrical Machines and Systems, pp. 2067-2070, 2008.
R.V.D. Rama Rao, Subhransu and Sekhar Dash, “Power Quality Enhancement by Unified Power Quality Conditioner Using ANN with Hysteresis Control”, International Journal of Computer Applications, vol.-6, pp. 9-15, September 2010.
Naresh K. Kummari, Asheesh K Singh and Pradeep Kumar, “Comparative Evaluation of DSTATCOM Control Algorithms for Load Compensation”, IEEE 15th International Conference on Harmonics and Quality of Power (ICHQP), pp. 299-306, 2012.
S.S. Wamane, J.R.Baviskar, S.R.Wagh and S.Kumar. “Performance Based Comparison of UPQC Compensating Signal Generation Algorithms Under Distorted Supply and Non Linear Load Conditions”, IEEE 8th Conference on Industrial Electronics and Applications (ICIEA), pp. 38-42, 2013.
A.Jeraldine Viji and M.Sudhakaran, “Generalized UPQC system with an improved Control Method under Distorted and Unbalanced Load Conditions”, International Conference on Computing, Electronics and Electrical Technologies (ICCEET), pp. 193-197, 2012.
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Journal of Microwave Engineering and Technologies