Effect of Surface Pore Filling and Adhesive Joining on Energy Absorption of Closed Cell Aluminum Foam

Authors

  • B. S. S. Daniel Indian Institute of Technology, Roorkee-247667, Uttrakhand, India
  • Vipin Kumar Indian Institute of Technology, Roorkee-247667, Uttrakhand, India

Keywords:

Aluminum foam, surface modification, joining, mechanical properties, buckling

Abstract

The joining of aluminum foam is explored in this paper. Foam specimens were sectioned and joined with commercially available adhesive and tested for its energy absorption capability against a normal foam specimen. There was a decrease in the plateau stress but the decrease is not significant. The effect of surface pore filling by the adhesive was also realized. It was found that the adhesive in the surface cells introduces constraints for buckling and delays the buckling whereby improving the foam property. Interrupted compression tests enabled us to gain insight into the deformation behavior of foams with and without pore filling. 

Author Biographies

  • B. S. S. Daniel, Indian Institute of Technology, Roorkee-247667, Uttrakhand, India
    Department of Metallurgical and Materials Engineering
  • Vipin Kumar, Indian Institute of Technology, Roorkee-247667, Uttrakhand, India
    Department of Metallurgical and Materials Engineering

Downloads

Published

2019-04-17

Issue

Vol. 2 No. 1-3 (2012)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.