Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice Husks Silica Blend

Authors

  • Ali I. Al-Mosawi University of Miskolc, Hungary
  • Shaymaa Abbas Abdulsada University of Miskolc, Hungary
  • Mohammed H. Al-Maamori Babylon University, Iraq

DOI:

https://doi.org/10.37591/jopc.v5i1.1733

Abstract

Abstract

The accumulation of agricultural and industrial manufacturing waste is an important environmental problem of the most countries in which the means of recycling these waste are not available. Therefore, it is important to find sustainable green engineering applications for the integration of these wastes in the industry and be an environmental, economic and industrial competitor and alternative to materials existing now. Cement waste and rice husks silica were added as a weight nanoscale particles (1 μm /0–40 pphr) and (10 μm /20 pphr) respectively to the Acrylonitrile - butadiene rubber (NBR) for making tri sustainable blend. Elongation and modulus of elasticity were measured before and after the addition of cement waste  and rice husks to NBR by Tansometer device, The results showed improved the value of the modulus of elasticity after reinforced by cement waste and rice husks, but and at the same time, elongation was decreased.

 

Keywords: NBR, mechanical properties, cement waste and rice husk

Cite this Article

Ali I. Al-Mosawi, Shaymaa Abbas Abdulsada, Mohammed H. Al-Maamori. Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice Husks Silica Blend. Journal of Polymer & Composites. 2017; 5(1): 29–31p.

Downloads

Published

2019-03-28

Issue

Vol. 5 No. 1 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.