A Review on Optimization of cutting parameters for machining Inconel 718 using Grey Relation Analysis

Authors

  • R. Ramya Student, Dept of Mechanical Engineering, Christ (Deemed to be University), India
  • Ivan Sunit Rout
  • Lee Yongmi
  • Manoj Kumar
  • Abishek Joseph John Assistant Professor, Department of Mechanical Engineering, Christ (Deemed to be University), Bengaluru, Karnataka, India

Keywords:

Ceramic tool, Grey relation analysis (GRA), Inconel 718, super alloys, Taguchi orthogonal array

Abstract

Inconel 718 is a nickel-cobalt based super alloy. It provides several advantages including high corrosion resistance and high temperature resistance. Thus the demand for such materials has rapidly increased. It is mostly used in aerospace, steam turbine, bearing industry and nuclear applications. Nickel-based super alloys such as Inconel 718 are known as one of the most difficult-to-cut materials. It is due to their mechanical and chemical properties and tool life is extremely short. Nowadays, Ceramic tool has received a considerable attention as a material for cutting tools and has already established itself in many areas of machining. But practically, the performance of Ceramic tool is still insufficient. This study investigates the optimization of cutting parameters for machining of Inconel 718 based on the Taguchi orthogonal array using the Grey Relation Analysis.

 

Keywords: Inconel 718, super alloys, Ceramic tool, Taguchi orthogonal array, Grey Relation Analysis

Downloads

Published

2018-07-09

Issue

Vol. 6 No. 2 (2018)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.