The Time and Frequency Response of Shielded Transformer Windings
DOI:
https://doi.org/10.37591/.v4i2.3170Abstract
A distributed-parameter model is presented for the transient and frequency analysis of power transformers’ windings in the presence of electrostatic shielding, a technique occasionally applied for improving their initial voltage distribution. The s-domain solution takes into account the windings’ circuit parameters with special emphasis on the additional distributed capacitances between the windings’ conductors and the conducting shield which is connected to the windings’ line terminal. The closeness of the resulting initial voltage profile to the ideal case of uniform distribution is suggested as a criterion for assessing the achieved improvement in the windings’ voltage stresses. This leads to the determination of the optimal shielding arrangement. The sensitivity of the modified initial and transient responses to step and double-exponential voltage stimuli is investigated. Moreover, the resulting change in the windings’ series and parallel resonance frequencies is also addressed.
Keywords: Power transformers, equivalent circuit, power system transients, transformer winding, shielding, distributed parameters, initial voltage distribution, high-frequency model, frequency response, resonance
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).