Design and Simulation of IRFOC for SPWM Inverter-fed Induction Motor Considering Core Loss and Stray Load Loss

Authors

  • Mohammad Abdul Mannan Department of Electrical and Electronic Engineering, American International University-Bangladesh, Kemal Ataturk Avenue, Banani, Dhaka-1213, Bangladesh
  • Md. ehtashamul haque
  • Rupak Kanti Dhar

DOI:

https://doi.org/10.37591/.v4i2.3172

Abstract

The principle of field oriented control (FOC) or vector control (VC) of induction motors (IMs) is based on the control of both the magnitude and the phase of each phase current and voltage to achieve the decoupling control strategies between flux and torque. To control the flux and the torque precisely based on the FOC, core losses (CL) and stray load losses (SLL), which are generally neglected, should be considered in the mathematical model of IM to design the controller. In order to achieve the precise flux and torque control of IM, some of literatures have proposed to detuning method for FOC of IM to compensate the effects of CL and SLL. But it has seen that the mathematical modeling of detuning process is very complex which makes the complexity in the case of implementation also. In this paper, a novel FOC of IM with consideration of both CL and SLL is proposed.  In this novel FOC of IM includes the decoupling control strategy which is easier than the detuning strategy. The effectiveness of proposed FOC of IM considering CL and SLL has been verified by the simulation work which has been done by using Matlab/Simulink. The simulation results show that the speed control with decoupling of flux and torque control for high performance of IM with considering CL and SLL based the proposed FOC can be achieved.

 

Keywords: Induction motor, Core loss, Stray Load loss, Field-oriented control,
 PI controller

Downloads

Published

2019-08-17

Issue

Vol. 4 No. 2 (2014)

Section

Research Article

License

Journal Title:

Title of the Paper:

Corresponding Author’s Information:

Name: Address:

E-mail:

Contact Number:

It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.

This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.

I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

 I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.

I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)

1. ________________

2. ________________

3. ________________

4. ________________

The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).