RTDS Hardware Implementation and Simulation of 3-ph 4-wire SHAF for Mitigation of Current Harmonics using p-q Control strategy With Fuzzy Controller
DOI:
https://doi.org/10.37591/.v1i1-2-3.3223Abstract
The main objective of this paper is to develop Fuzzy controller to analyse the performance of instantaneous real
active and reactive power (p–q) control strategy for extracting reference currents of shunt active filters under
balanced, un-balanced and balanced non-sinusoidal conditions. When the supply voltages are balanced and
sinusoidal, the all control strategies are converge to the same compensation characteristics; However, the
supply voltages are distorted and/or un-balanced sinusoidal, these control strategies result in different degrees
of compensation in harmonics. With PI controller the p-q control strategy unable to yield an adequate solution
when source voltages are not ideal. Extensive simulations are carried out with Fuzzy controller for p–q control
strategy under different main voltages. The 3-ph 4-wire SHAF system is also implemented on a Real Time
Digital Simulator (RT DS Hardware) to further verify its effectiveness. The detailed simulation and RT DS
Hardware results are included.
Keywords: Harmonic compensation, SHAF, p–q control strategy, Fuzzy Controller and RT DS Hardware
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).