Open Access Open Access  Restricted Access Subscription or Fee Access

Latest Research Trend of Optimization Techniques and Considerable Parameters in Wire Electrical Discharge Machining (WEDM): Review Article

Vaishali Sharma, Manish Kumar Sagar

Abstract


Wire electrical discharge machining (WEDM) is a non-conventional machining method with unique capabilities. WEDM offers a better alternative or sometimes the only alternative to produce complex shaped features and components of difficult-to-machine materials. In today’s highly competitive manufacturing industries, manufacturer’s ultimate goal is to produce high quality product with less time and cost constraint. To achieve these goals, one of the considerations is by optimizing the machining process parameters such as, cutting speed, pulse on/off durations, voltage, wire feed, wire tension etc. Various optimization techniques are available for the optimization of the machining process parameters. This paper gives an overview and the comparison of latest sixteen years researches from 2000 to 2015 wherein various methods were used to optimize machining parameters of WEDM. The research papers reviewed here came from selected databases, which limits the generalizability of the findings to the whole existing literature on WEDM [1]. The review of the existing literature was done to reduce the time and efforts of present and future researchers in this area by providing them a quick snapshot of the latest trend in techniques, materials and various parameters of WEDM. As herein, the literature found that Taguchi and regression analysis had been widely used for optimizing machining parameters.


Keywords


Machining, optimization, literary work (2000–2015)

Full Text:

PDF

References


Agariya AK, Singh D. What Really Defines Relationship Marketing? A Review on Definitions and General and Sector-Specific Defining Constructs. Journal of Relationship Marketing. 2011; 203–237p.

Kanlayasiri K, Boonmung S. Effects of Wire-EDM Machining Variables on Surface Roughness of Newly Developed DC 53 Die Steel: Design of Experiments and Regression Model. J Mater Process Technol. 2007; 192–193: 459–464p.

Liao YS, Huang JT, Chen YS. A Study to Achieve Fine Surface Finish in Wire-EDM. J Mater Process Technol. 2004; 5: 165–171p.

Tilekar S, Das SS, Patowari PK. Process Parameter Optimization of Wire EDM on Aluminium and Mild Steel by Using Taguchi Method. Procedia Materials Science. 2014; 5: 2577–2584p.

Shandilya P, Jain PK, Jain NK. Parametric Optimization during Wire Electrical Discharge Machining Using Response Surface Methodology. Procedia Eng. 2012; 38: 2371–2377p.

Chalisgaonkar R, Kumar J. Optimization of WEDM Process of Pure Titanium with Multiple Performance Characteristics using Taguchi's DOE Approach and Utility Concept. Frontiers of Mechanical Engineering. 2013; 201–214p.

Kuriakose S, Mohan K, Shunmugam MS. Data Mining Applied to Wire-EDM Process. J Mater Process Technol. 2003; 142: 182–189p.

Rao RV. Advanced Modelling and Optimization of Manufacturing Processes. International Research and Development, Springer. 2010.

Mahapatra SS, Patnaik A. Parametric Optimization of Wire Electrical Discharge Machining Process Using Taguchi method. J Braz Soc Mech Sci Eng. 2006; 28.

Tosun N, Cogun C, Tosun G. A Study on Kerf and Material Removal Rate in Wire Electrical Discharge Machining Based on Taguchi Method. J Mater Process Technol. 2004; 152: 316–322p.

Han F, Cheng G, Feng Z, et al. Thermo-Mechanical Analysis and Optimal Tension Control of Micro Wire Electrode. Int J Mach Tools Manuf. 2008; 48: 922–931p.

Gautier G, Priarone PC, Rizzuti S, et al. A Contribution on the Modelling of Wire Electrical Discharge Machining of Gamma-TiAl Alloy. Procedia CIRP. 2015; 31: 203–208p.

Zhang G, Chen Z, Zhang Z, et al. A Macroscopic Mechanical Model of Wire Electrode Deflection Considering Temperature Increment in MS-WEDM Process. Int J Mach Tools Manuf. 2014; 78: 41–53p.

Bhatia A, Kumar S, Kumar P. A Study to Achieve Minimum Surface Roughness in Wire-EDM. Procedia Materials Science. 2014; 5: 2560–2566p.

Yan MT, Huang PH. Accuracy Improvement of Wire-EDM by Real-Time Wire Tension Control. Int J Mach Tools Manuf. 2004; 44: 807–814p.

Yan MT, Feng CC. Application of Genetic Algorithm-Based Fuzzy Logic Control in Wire Transport System of Wire-EDM Machine. J Mater Process Technol. 2008; 205: 128–137p.

Tomura S, Kunieda M. Analysis of Electromagnetic Force in Wire-EDM. Precis Eng. 2009; 33: 255–262p.

Tosun N, Cogun C. An Investigation on Wire Wear in WEDM. J Mater Process Technol. 2003; 134: 273–278p.

Gupta K, Jain NK. Analysis and Optimization of Micro-Geometry of Miniature Spur Gears Manufactured by Wire Electric Discharge Machining. Precis Eng. 2014; 38: 728–737p.

Çaydas U, Hasҫlik A, Ekici S. An Adaptive Neuro-Fuzzy Inference System (ANFIS) Model for Wire-EDM. Expert Syst Appl. 2009; 36: 6135–6139p.

Durairaj M, Sudharsun D, Swamynathan N. Analysis of Process Parameters in Wire EDM with Stainless Steel using Single Objective Taguchi Method and Multi Objective Grey Relational Grade. Procedia Eng. 2013; 64: 868–877p.

Pujari Srinivasa Rao, Koona Ramji, Beela Satyanarayana. Experimental Investigation and Optimization of Wire EDM Parameters for Surface Roughness, MRR and White layer in Machining of Aluminium Alloy. Procedia Materials Science. 2014; 5: 2197–2206p.

Cabanes I, Portillo E, Marcos M, et al. An Industrial Application for On-Line Detection of Instability and Wire Breakage in Wire EDM. J Mater Process Technol. 2008; 195: 101–109p.

Bobbili R, Madhu V, Gogia AK. An Experimental Investigation of Wire Electrical Discharge Machining of Hot-Pressed Boron Carbide. Defence Technology. 2015; 1–6p.

Rao MS, Venkaiah N. Review on Wire-Cut EDM Process. International Journal of Advanced Trends in Computer Science and Engineering (IJATCSE). 2013; 2: 12–17p.

Okada A, Uno Y, Nakazawa M, et al. Evaluations of Spark Distribution and Wire Vibration in Wire EDM by High-Speed Observation. CIRP Ann Manuf Techn. 2010; 59: 231–234p.

Manjaiah M, Narendranath S, Basavarajappa S, et al. Effect of Electrode Material in Wire Electro Discharge Machining Characteristics of Ti50 Ni50-x Cux Shape Memory Alloy. Precis Eng. 2015; 41: 68–77p.

Yu Po-Huai, Lin Yang-Xin, Lee Hsiang Kuo, et al. Improvement of Wire Electrical Discharge Machining Efficiency in Machining Polycrystalline Silicon with Auxiliary-Pulse Voltage Supply. Int J Adv Manuf Technol. 2011; 57: 991–1001p.

Maher I, Ling LH, Sarhan AAD. Improve Wire EDM Performance at Different Machining Parameters: ANFIS Modeling. IFAC PapersOnLine. 2015; 48–1: 105–110p.

Fard RK, Afza RA, Teimouri R. Experimental Investigation, Intelligent Modeling and Multi-Characteristics Optimization of Dry WEDM Process of Al-SiC Metal Matrix Composite. J Manuf Processes. 2013; 15: 483–494p.

Parashar V, Rehman A, Bhagoria JL. Kerfs Width Analysis for Wire Cut Electro Discharge Machining of SS 304L using Design of Experiments. Ind J Sci Technol. 2010; 3.

Menzies I, Koshy P. Assessment of Abrasion-Assisted Material Removal in Wire EDM. CIRP Ann Manuf Techn. 2008; 57: 195–198p.

Miller SF, Shih AJ, Qu J. Investigation of the Spark Cycle on Material Removal Rate in Wire Electrical Discharge Machining of Advanced Materials. Int J Mach Tools Manuf. 2004; 44: 391–400p.

Singh V, Pradhan SK. Optimization of WEDM Parameters using Taguchi Technique and Response Surface Methodology in Machining of AISI D2 Steel. Procedia Eng. 2014; 97: 1597–1608p.

Liao YS, Huang JT, Chen YH. A Study to Achieve a Fine Surface Finish in Wire-EDM. J Mater Process Technol. 2004; 149: 165–171p.

Nayak BB, Mahapatra SS. A Utility Concept Approach for Multi-Objective Optimization of Taper Cutting Operation using WEDM. Procedia Eng. 2014; 97: 469–478p.

Jangra KK, Kumar V, Kumar V. An Experimental and Comparative Study on Rough and Trim Cutting Operation in WEDM of Hard to Machine Materials. Procedia Materials Science. 2014; 5: 1603–1612p.

Qu J, Shih AJ, Scattergood RO. Development of the Cylindrical Wire Electrical Discharge Machining Process, Part 1: Concept, Design, and Material Removal Rate. J Manuf Sci Eng. 2002; 124: 702–707p.

Hada K, Kunieda M. Analysis of Wire Impedance in Wire-EDM Considering Electromagnetic Fields Generated Around Wire Electrode. Procedia CIRP. 2013; 6: 244–249p.

Han F, Jiang J, Yu D. Influence of Machining Parameters on Surface Roughness in Finish Cut of WEDM. Int J Adv Manuf Technol. 2007; 34: 538–546p.

Newton TR, Melkote SN, Watkins TR, et al. Investigation of the Effect of Process Parameters on the Formation and Characteristics of Recast Layer in Wire-EDM of Inconel 718. Mater Sci Eng A. 2009; 513–515: 208–215p.

Tani T, Fukuzawa Y, Mohri N, et al. Machining Phenomena in WEDM of Insulating Ceramics. J Mater Process Technol. 2004; 149: 124–128p.

Bobbili R, Madhu V, Gogia AK. Modelling and Analysis of Material Removal Rate and Surface Roughness in Wire-Cut EDM of Armour Materials. Engineering Science and Technology, an International Journal. 2015; 18: 664–668p.

Sivaprakasam P, Hariharan P, Gowri S. Modeling and Analysis of Micro-WEDM Process of Titanium Alloy (Tie6Ale4V) Using Response Surface Approach. Engineering Science and Technology, an International Journal. 2014; 17: 227–235p.

Ramakrishnan R, Karunamoorthy L. Modeling and Multi-Response Optimization of Inconel 718 on Machining of CNC WEDM Process. J Mater Process Technol. 2008; 207: 343–349p.

Hewidy MS, El-Taweel TA, El-Safty MF. Modelling the Machining Parameters of Wire Electrical Discharge Machining of Inconel 601 using RSM. J Mater Process Technol. 2005; 169: 328–336p.

Sharma N, Singh A, Sharma R, et al. Modelling the WEDM Process Parameters for Cryogenic Treated D-2 Tool Steel by Integrated RSM and GA. Procedia Eng. 2014; 97: 1609–1617p.

Gowd GH, Reddy MG, Sreenivasulu B, et al. Multi-Objective Optimization of Process Parameters in WEDM during Machining of SS304. Procedia Materials Science. 2014; 5: 1408–1416p.

Garg MP, Jain A, Bhushan G. Multi-objective Optimization of Process Parameters in Wire Electric Discharge Machining of Ti-6-2-4-2 Alloy. Arab J Sci Eng. 2014; 39: 1465–1476p.

Sharma N, Khanna R, Gupta R. Multi Quality Characteristics Of WEDM Process Parameters With RSM. Procedia Eng. 2013; 64: 710–719p.

Chalisgaonkar R, Kumar J. Multi-Response Optimization and Modeling of Trim Cut WEDM Operation of Commercially Pure Titanium (CPTi) Considering Multiple User's Preferences. Engineering Science and Technology, an International Journal. 2015; 18: 125–134p.

Bobbili R, Madhu V, Gogia AK. Multi Response Optimization of Wire-EDM Process Parameters of Ballistic Grade Aluminium Alloy. Engineering Science and Technology, an International Journal. 2015; 18: 720–726p.

Khan ZA, Siddiquee AN, Khan NZ, et al. Multi Response Optimization of Wire Electrical Discharge Machining Process Parameters using Taguchi based Grey Relational Analysis. Procedia Materials Science. 2014; 6: 1683–1695p.

Dongre G, Zaware S, Dabade U, et al. Multi-Objective Optimization for Silicon Wafer Slicing Using Wire-EDM Process. Mater Sci Semicond Process. 2015; 39: 793–806p.

Saha P, Tarafdar D, Pal SK, et al. Multi-Objective Optimization in Wire-Electro-Discharge Machining of TiC Reinforced Composite through Neuro-Genetic Technique. Appl Soft Comput. 2013; 13: 2065–2074p.

Goswami A, Kumar J. Investigation of Surface Integrity, Material Removal Rate and Wire Wear Ratio for WEDM of Nimonic 80A Alloy Using GRA and Taguchi Method. Engineering Science and Technology, an International Journal. 2014; 17: 173–184p.

Jangra K, Grover S, Aggarwal A. Optimization of Multi Machining Characteristics in WEDM of WC-5.3% Co Composite Using Integrated Approach of Taguchi, GRA and Entropy Method. Frontiers of Mechanical Engineering. 2012; 7(3): 288–299p.

Chiang KT, Chang FP. Optimization of the WEDM Process of Particle-Reinforced Material with Multiple Performance Characteristics Using Grey Relational Analysis. J Mater Process Technol. 2006; 180: 96–101p.

Chen HC, Lin JC, Yang YK, et al. Optimization of Wire Electrical Discharge Machining for Pure Tungsten Using a Neural Network Integrated Simulated Annealing Approach. Expert Syst Appl. 2010; 37: 7147–7153p.

Manjaiah M, Narendranath S, Akbari J. Optimization of Wire Electro Discharge Machining Parameters to Achieve Better MRR and Surface Finish. Procedia Materials Science. 2014; 5: 2635–2644p.

Nayak BB, Mahapatra SS. Optimization of WEDM Process Parameters using Deep Cryo-Treated Inconel 718 as Work Material. Engineering Science and Technology, an International Journal. 2015.

Sarkar S, Mitra S, Bhattacharyya. Parametric Analysis and Optimization of Wire Electrical Discharge Machining of titanium Aluminide Alloy. J Mater Process Technol. 2005; 159: 286–294p.

Aggarwal V, Khangura SS, Garg RK. Parametric Modeling and Optimization for Wire Electrical Discharge Machining of Inconel 718 Using Response Surface Methodology. Int J Adv Manuf Technol. 2015; 79: 31–47p.

Shandilya P, Jain PK, Jain NK. Parametric Optimization during Wire Electrical Discharge Machining using Response Surface Methodology. Procedia Eng. 2012; 38: 2371–2377p.

Ikram A, Mufti NA, Saleem MQ, et al. Parametric Optimization for Surface Roughness, Kerf and MRR in Wire Electrical Discharge Machining (WEDM) using Taguchi Design of Experiment. Journal of Mechanical Science and Technology (JMST). 2013; 27(7): 2133–2141p.

Sarkar S, Mitra S, Bhattacharyya B. Parametric Optimisation of Wire Electrical Discharge Machining of γ Titanium Aluminide Alloy through an Artificial Neural Network Model. Int J Adv Manuf Technol. 2006; 27: 501–508p.

Shayan AV, Afza RA, Teimouri R. Parametric Study Along with Selection of Optimal Solutions in Dry Wire Cut Machining of Cemented Tungsten Carbide (WC-Co). J Manuf Process. 2013; 15: 644–658p.

Sharma A, Garg MP, Goyal KK. Prediction of Optimal Conditions for WEDM of Al 6063/ ZrSiO4(p) MMC. Procedia Materials Science. 2014; 6: 1024–1033p.

Chalisgaonkar R, Kumar J. Process Capability Analysis and Optimization in WEDM of Commercially Pure Titanium. Procedia Eng. 2014; 97: 758–766p.

Yuan J, Wang K, Yu T, et al. Reliable Multi-Objective Optimization of High-Speed WEDM Process Based on Gaussian Process Regression. Int J Mach Tools Manuf. 2008; 48: 47–60p.

Rao TB, Krishna AG. Simultaneous Optimization of Multiple Performance Characteristics in WEDM for Machining ZC63/SiCp MMC. Advances in Manufacturing. 2013; 1: 265–275p.

Yan MT, Lai YP. Surface Quality Improvement of Wire-EDM Using a Fine-Finish Power Supply. Int J Mach Tools Manuf. 2007; 47: 1686–1694p.

Soo SL, Antar MT, Aspinwall DK, et al. The Effect of Wire Electrical Discharge Machining on the Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo Aerospace Alloy. Procedia CIRP. 2013; 6: 215–219p.

Lin HC, Lin KM, Chen YS, et al. The Wire Electro-Discharge Machining Characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr Shape Memory Alloys. J Mater Process Technol. 2005; 161: 435–439p.

Sharma N, Khanna R, Gupta R. WEDM Process Variables Investigation for HSLA by Response Surface Methodology and Genetic Algorithm. Engineering Science and Technology, an International Journal. 2015; 18: 171–177p.

Aspinwall DK, Soo SL, Berrisford AE, et al. Workpiece Surface Roughness and Integrity after WEDM of Ti-6Al-4V and Inconel 718 using Minimum Damage Generator Technology. CIRP Ann Manuf Technol. 2008; 57: 187–190p.

Ugrasen G, Ravindra HV, Naveen Prakash GV, et al. Estimation of Machining Performances using MRA, GMDH and Artificial Neural Network in Wire EDM of EN-31. Procedia Materials Science. 2014; 6: 1788–1797p.

Goswami A, Kumar J. Optimization in Wire-Cut EDM of Nimonic-80A using Taguchi's Approach and Utility Concept. Engineering Science and Technology, an International Journal. 2014; 236–246p.

Mathew B, Benkim, Babu J. Multiple Process Parameter Optimization of WEDM on AISI304 Using Taguchi Grey Relational Analysis. Procedia Materials Science. 2014; 5: 1613–1622.

Ugrasen G, Ravindra HV, Naveen Prakash GV, et al. Process Optimization and Estimation of Machining Performances Using Artificial Neural Network in Wire EDM. Procedia Materials Science. 2014; 6: 1752–1760p.

Kimura A, Okamoto Y, Okada A, et al. Fundamental Study on Multi-Wire EDM Slicing of SiC by Wire Electrode with Track-Shaped Section. Procedia CIRP. 2013; 6: 232–237p.

Hasçalýk A, Çaydaş U. Experimental Study of Wire Electrical Discharge Machining of AISI D5 Tool Steel. J Mater Process Technol. 2004; 148: 362–367p.

Bamberg E, Rakwal D. Experimental Investigation of Wire Electrical Discharge Machining of Gallium-Doped Germanium. J Materials Process Technol. 2008; 197: 419–427p.

Go¨kler MI, Ozanözgü AM. Experimental Investigation of Effects of Cutting Parameters on Surface Roughness in the WEDM Process. Int J Mach Tools Manuf. 2000; 40: 1831–1848p.

Yan MT, Liu YT. Design, Analysis and Experimental Study of a High-Frequency Power Supply for Finish Cut of Wire-EDM. Int J Mach Tools Manuf. 2009; 49: 793–796p.

Takino H, Ichinohe T, Tanimoto K, et al. Cutting of Polished Single-Crystal Silicon by Wire Electrical Discharge Machining. Precision Eng. 2004; 28: 314–319p.

Sarkar S, Sekh M, Mitra S, et al. Modeling and Optimization of Wire Electrical Discharge Machining of Gamma-TiAl in Trim Cutting Operation. J Mater Process Technol. 2008; 205: 376–387p.

Jangra K, Grover S, Chan FTS, et al. Digraph and Matrix Method to Evaluate the Machinability of Tungsten Carbide Composite with Wire EDM. Int J Adv Manuf Technol. 2011; 56: 959–974p.

Puri AB, Bhattacharyya B. An Analysis and Optimization of the Geometrical Inaccuracy due to Wire Lag Phenomenon in WEDM. Int J Mach Tools Manuf. 2003; 43: 151–159p.

Juhr H, Schulze HP, Wollenberg G, et al. Improved Cemented Carbide Properties after Wire-EDM by Pulse Shaping. J Mater Process Technol. 2004; 149: 178–183p.

Hargrove SK, Ding D. Determining Cutting Parameters in Wire EDM Based on Workpiece Surface Temperature Distribution. Int J Adv Manuf Technol. 2007; 34: 295–299p.

Yan MT, Chein HT. Monitoring and Control of the Micro Wire-EDM Process. Int J Mach Tools Manuf. 2007; 47: 148–157p.

Puri AB, Bhattacharyya B. Modeling and Analysis of White Layer Depth in a Wire-Cut EDM Process through Response Surface Methodology. Int J Manuf Technol. 2005; 25: 301–307p.

Kuriakose S, Shunmugum MS. Multi-Objective Optimization of Wire-Electro Discharge Machining Process by Non-Dominated Sorting Genetic Algorithm. J Mater Process Technol. 2005; 170: 133–141p.

Li L, Guo YB, Wei XT, et al. Surface Integrity Characteristics in Wire-EDM of Inconel 718 at Different Discharge Energy. Procedia CIRP. 2013; 6: 220–225p.

Nourbakhsh F, Rajurkar KP, Malshe AP, et al. Wire Electro-Discharge Machining of Titanium Alloy. Procedia CIRP. 2013; 5: 13–18p.

Klocke F, Welling D, Dieckmann J. Comparison of Grinding and Wire EDM Concerning Fatigue Strength and Surface Integrity of Machined Ti6Al4V Components. Procedia Eng. 2011; 19: 184–189p.

Antar MT, Soo SL, Aspinwall DK, et al. Productivity and Workpiece Surface Integrity when WEDM Aerospace Alloys Using Coated Wires. Procedia Eng. 2011; 19: 3–8p.

Sarkar S, Sekh M, Mitra S, et al. A Novel Method of Determination of Wire Lag for Enhanced Profile Accuracy in WEDM. Precision Eng. 2011; 35: 339–347p.

Zhao W, Chen M, Chen H. A Novel Trajectory Interpolation Algorithm for WEDM. Procedia CIRP. 2013; 6: 255–260p.

Yan MT, Fang GR, Liu YT. An Experimental Study on Micro Wire-EDM of Polycrystalline Diamond Using a Novel Pulse Generator. Int J Adv Manuf Technol. 2013.

Di S, Chu X, Wei D, et al. Analysis of Kerf width in Micro-WEDM. Int J Mach Tools Manuf. 2009; 49: 788–792p.

Kwon S, Yang MY. Benefits of Using Instantaneous Energy to Monitor the Transient State of the Wire EDM Process. Int J Adv Manuf Technol. 2006; 27: 930–938p.

Guo ZN, Yue TM, Lee TC, et al. Computer Simulation and Characteristic Analysis of Electrode Fluctuation in Wire Electric Discharge Machining. J Mater Process Technol. 2003; 142: 576–581p.

Takino H, Ichinohe T, Tanimoto K, et al. Contouring of Polished Single-Crystal Silicon Plates by Wire Electrical Discharge Machning. Precision Eng. 2007; 31: 358–363p.

Qu J, Shih AJ, Scattergood RO. Development of Cylindrical Wire Electrical Discharge Machinig Process, Part 2: Surface Integrity and Roundness. J Manuf Sci Eng. 2002; 124(3): 708–714p.

Lee S, Scarpulla MA, Bamberg E. Effect of Metal Coating on Machinability of High Purity Germanium Using Wire Elctrical Discharge Machining. J Mater Process Technol. 2013; 213: 811–817p.

Khundrakpam NS, Singh J, Kumar K, et al. Effect of Wire EDM Process Parameters on Surface Roughness. International Journal of Mechanical Engineering and Robotics Research (IJMERR). 2014; 3.

Kanlayasiri K, Boonmung S. An Investigation on Effects of Wire-EDM Machining Parameters on Surface Roughness of Newly Developed DC53 Die Steel. J Mater Process Technol. 2007; 187–188: 26–29p.

Subrahmanyam SV, Sarcar MMM. Evaluation of Optimal Parameters for Machining with Wire Cut EDM Using Grey-Taguchi Method. International Journal of Scientific and Research Publications. 2013; 3.

Sharma P, Chakradhar D, Narendranath S. Evaluation of WEDM Performance Characteristics of Inconel 706 for Turbine Disk Application. Mater Des. 2015; 88: 558–566p.

Yan BN, Tsai HC, Huang FY, et al. Examination of Wire Electrical Discharge Machining of Al2O3p/6061 Al Composites. Int J Mach Tools Manuf. 2005; 45: 251–259p.

Sanchez JA, Plaza S, Ortega N, et al. Experimental and Numerical Study of Angular Error in Wire-EDM Taper-Cutting. Int J Mach Tools Manuf. 2008; 48: 1420–1428p.

Cheng G, Han F, Feng Z. Experimental Determination of Convective Heat Transfer Coefficient in WEDM. Int J Mach Tools Manuf. 2007; 47: 1744–1751p.

Antar MT, Soo SL, Aspinwall DK, et al. Fatigue Response of Udimet 720 Following Minimum Damage Wire Electrical Discharge Machining. Mater Des. 2012; 42: 295–300p.

Yuan J, Liu CL, Liu X, et al. Incorporating Prior Model into Gaussian Processes Regression for WEDM Process Modeling. Expert Syst Appl. 2009; 36: 8084–8092p.

Alias A, Abdullah B, Mohd Abbas N. Influence of Machine Feed Rate in WEDM of Titanium Ti-6Al-4V with Constant Current (6A) using Brass Wire. Procedia Eng. 2012; 41: 1806–1811p.

Lauwers B, Liu W, Earaerts W. Influence of the Composition of WC-Based Cermets on Manufacturability by Wire-EDM. J Manuf Process. 2006; 8.

Lauwers B, Brans K, Liu W, et al. Influence of the Type and Grain Size of the Electro-Conductive Phase on the Wire-EDM Performance of ZrO2 Ceramic Composites. CIRP Ann Manuf Technol. 2008; 57: 191–194p.

Miller SF, Kao CC, Shih AJ, et al. Investigation of Wire Electrical Discharge Machining of Thin Cross-Sections and Compliant Mechanisms. Int J Mach Tools Manuf. 2005; 45: 1717–1725p.

Kozak J, Rajurkar KP, Chandarana N. Machining of Low Electrical Conductive Materials by Wire Electrical Discharge Machining (WEDM). J Mater Process Technol. 2004; 149: 266–271p.

Reddy PVB, Kumar CRV, Reddy KH. Modeling of Surface Roughness in Wire Electrical Discharge Machining Using Artificial Neural Networks. International Journal of Mechanical Engineering and Robotics Research (IJMERR). 2013; 2.

Kumar A, Bagal DP, Maity KP. Numerical Modeling of Wire Electrical Discharge Machining of Super Alloy Inconel 718. Procedia Eng. 2014; 97: 1512–1523p.

Chalisgaonkar R, Kumar J. Optimization of WEDM Process of Pure Titanium with Multiple Performance Characteristics using Taguchi’s DOE Approach and Utility Concept. Frontiers of Mechanical Engineering. 2013; 8(2): 201–214p.

Plaza S, Ortega N, Sanchez JA, et al. Original Models for the Prediction of Angular Error in Wire-EDM Taper-Cutting. Int J Manuf Technol. 2009; 44: 529–538p.

Kumar A, Kumar V, Kumar J. Parametric Effect on Wire Breakage Frequency and Surface Topography in WEDM of Pure Titanium. Journal of Mechanical Engineering and Technology (JMET). 2013; 1: 51–56p.

Antar MT, Soo SL, Aspinwall DK, et al. Productivity and Workpiece Surface Integrity when WEDM Aerospace Alloys Using Coated Wires. Procedia Eng. 2011; 19: 3–8p.

Prasad VSK, Rajyalakshmi G, Ramaiah PV. Simulation and Modeling of Performance Characteristic of Wire Cut EDM on Inconel825 using Multiple Regression and ANN. International Conference on Mathematical Computer Engineering, ICMCE. 2013; 147–155p.

Poroś D, Zaborski S. Semi-Empirical Model of Efficiency of Wire Electrical Discharge Machining of Hard-to-Machine Materials. J Mater Process Technol. 2009; 209: 1247–1253p.

Hou PJ, Guo YF, Sun LX, et al. Simulation of Temperature and Thermal Stress Filed During Reciprocating Traveling WEDM of Insulating Ceramics. Procedia CIRP. 2013; 6: 410–415p.

Kanlayasiri K, Jattakul P. Simultaneous Optimization of Dimensional Accuracy and Surface Roughness for Finishing Cut of Wire-EDMed K460 Tool Steel. Precision Eng. 2013; 37: 556–561p.

Yang X, Feng G, Teng Q. Temperature Field Simulation of Wire Electrode in High-speed and Medium-speed WEDM under Moving Heat Source. Procedia CIRP. 2012; 1: 633–638p.

Tosun N, Coogun C, Pihtili H. The Effect of Cutting Parameters on Wire Crater Sizes in Wire EDM. Int J Adv Manuf Technol. 2003; 21: 857–865p.

Hsieh SF, Chen SL, Lin HC, et al. The Machining Characteristics and Shape Recovery Ability of Ti-Ni-X (X=Zr, Cr) Ternary Shape Memory Alloys Using the Wire Electro-Discharge Machining. Int J Mach Tools Manuf. 2009; 49: 509–514p.

Hsu FC, Tai TY, Vo VN, et al. The Machining Characteristics of Polycrystalline Diamond (PCD) by Micro-WEDM. Procedia CIRP. 2013; 6: 261–266p.

Han F, Cheng G, Feng Z, et al. Thermo-Mechanical Analysis and Optimal Tension Control of Micro Wire Electrode. Int J Mach Tools Manuf. 2008; 48: 922–931p.

Klocke F, Lung D, Thomaidis D, et al. Using Ultra Thin Electrodes to Produce Micro-Parts with Wire-EDM. J Mater Process Technol. 2004; 149: 579–584p.

Dodun O, Gonҫalves-Coelho AM, Slặtineanu L, et al. Using Wire Electrical Discharge Machining for Improved Corner Cutting Accuracy of Thin Parts. Int J Adv Manuf Technol. 2009; 41: 858–864p.

Selvakumar G, Sarkar S, Mitra S. Experimental Analysis on WEDM of Monel 400 Alloys in a Range of Thicknesses. International Journal of Modern Manufacturing Technologies (IJMMT). 2012; 4: 113–120p.

Liao YS, Yu YP. The Energy Aspect of Material Property in WEDM and its Application. J Mater Process Technol. 2004; 149: 77–82p.

Sanchez JA, Rodil JL, Herreoro A, et al. On the Influence of Cutting Speed Limitation on the Accuracy of Wire-EDM Corner-Cutting. J Mater Process Technol. 2007; 182: 574–579p.




DOI: https://doi.org/10.37591/joprm.v6i2.7202

Refbacks

  • There are currently no refbacks.