Open Access Open Access  Restricted Access Subscription or Fee Access

Properties of Aluminium 6063 T6 by the Application of Friction Stir Processing

Bhuvaneshwar Panday

Abstract


With the advancement in technology and limited energy resources, now Manufacturing Industries are focusing more towards the material having better strength as compare to its weightand to reduce the material wastage industries are now demanding those processes which are highly efficient and can be easily performed. Friction stir processing have started a revolution in the field of material property modification. In this article we are discussing about an Investigation on changes in mechanical properties of Aluminium 6063 T6 alloy by the application of friction stir Processing .


Keywords


Aluminium, Friction Stir Processing, Friction stir welding, surfaces, alloy

Full Text:

PDF

References


Mishra, R.S and Mahoney, M.W, “Friction stir processing: A New Grain Refinement Technique in Commercial Alloys”, Material Science Forum,2001 Volumes357-359,Pages 507-514

Thomas, W.M., Nicholas, E.D., “Friction Stir welding for the transportation industries. Material and Design”, 1997 volume 18, 269-273

Sunil Sinhmar, Dheerendra K. Dwivedi, and VivekPancholi, Friction Stir Processing of AA 7039 Alloy. ICPME 2014 Dec.30-31, 2014 Bangkok,Thailand.

N.Sun, D Apelian, “Microstructural Modification of A206 Aluminium Via Friction Stir Processing”, Material Science Forum, Vol. 618-619, pp. 361-364,2009.

Alaa Mohammed Hussein Wais, Dr. Jassim Mohammed Salman, Dr. Ahmed Quda Al-Roubaiy, IJSTR Volume 2, Issue 12 December 2013.

Z.Y. Ma, R.S. Mishra and M. W. Mahoney, “ Superplastic behavior of friction stir processed 7075Al Alloy” ActaMaterialia, October 2002, Volume 50, Issue 17, Pages 4419-4430.

W.J. Arbegast, in: Z Jin,A.Beaudoin,T.A. Bieler, B. Radhakrishnan (Eds.), Hot Deformation Of aluminium Alloys III, TMS, Warrendale, PA, USA,2003,p. 313.

S. Ramesh Babu, V.S. Senthil Kumar , G. Madhushudan Reddy, L. Karunamoorthy, Proceeding Engineering 38 (2012) 2956-2966, 1877-7058 published by Elsvier Ltd.

M. Peel , A steuwer, M.preuss, P.J. Withers. “ Microstructure, mechanical properties and residual stresses as function of welding speed in aluminium AA5083 friction stir Welds. M.Peel et al/ Actamaterialia 51 (2003) 4791-4801.

C. G. Rhodes, M.W. Mahoney, W. H. Bingel and M. calabrese, “Fine grain evolution in friction stir processed 7050 Aluminium” ,ScriptaMaterialia,volume 48, Issue 10, May 2003,pages 1451-1455.

S. Benavides, Y.Li, L.E. Murr, D.Brown and J.C. McClure.10 september 1999. “low –temperature friction stir welding of 2024 aluminium”, Scriptamaterialia, Vol. 41, Issue 8. Pg. 809-815.

DonatoSorgente, Sabina Luisa Campnelli, Alessandro Stechhi, Nicola Contuzzi, Strain Behaviour Of Friction Stir Processed Superplastic aluminium Alloy Sheet During Free Inflation Tests. Journal Of Manufacturing Processes 23 (2016) 287-295.

H.B. Cui, G.M. Xie, Z.A. Luo, J. Ma, G.D. Wang, R.D.K Misra., “ Microstructural Evolution and Mechanical Properties of Stir Zone in Friction Stir Processed AISI201 Stainless Steel. Material and Design 106 (2016) 463-475.

Y.J. Kwon, I. Shigematsu and N.Saito, “ Mechanical properties of fine grained aluminium alloy produced by friction stir process” , ScriptaMaterialia, Volume 49 , Issue 8, October 2003, Pages 785-789.

R.S. Mishra, Z.Y. MA, “Friction Stir Welding and Processing”. Material science and engineering R 50 (2005) 1-78.

Hakan Aydin, Ali Bayram, AgahUguz, Kemal SertanAkay, “ Tensile Properties of Friction Stir Welded Joints of 2024 aluminium Alloys in different Heat treated state”. Material and design 30 (2009) 2211-2221.

M.J. Jones, P. Heurtier, C. Desrayaud, F. Monteheillet, D. Allehaux, J.H. Driver. “Correlation between microstructure and microhardness in a friction stir welded 2024 aluminium alloy”.ScriptaMaterialia 52 (2005) 693-697.

C. Genevois, A Deschamps, P.Vacher, “ Comparative study on local and global mechanical properties of 2024 T351, 2024 T6 and 5251 O friction stir Welds”. Materials Science and engineering A 415 (2006) 162-170.

N. ShanmugaSundaram, N. Murugan, “ Dependence of ultimate tensile strength of friction stir welded AA2024-T6 aluminium alloy on friction stir welding process parameters”. ISSN 1392-1207 Mechanika.2009.Nr. 4(78).

Yong-Jai KWON, Seong-Beomm Shim, Dong-Hwan PARK, “ friction stir welding of 5052 aluminium alloy plates. Trans. Nonferrous Met. Soc. China 19(2009) s23-s27.

M.Peel, A. Steuwer, M.Preuss,P.J. Withers, “ Microstructure, mechanical properties and residual stresses as a function of welding Speed in Aluminium AA 5083 friction stir welds”. ActaMAterialia 51 (2003) 4791-4801.

M.Simoncini, A forcellese, “ Effect of the welding parameters and tool configuration on micro and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets. Materials and design 41 (2012) 50-60.

SrinivasAthreya,Dr Y.D. Venkatesh, “ Application of Taguchi Method for optimization of process parameters in improving The surface roughness of lathe Facing operation”. IRJES ISSN (online) 2319-183X, Volume 1,Issue3 (November 2102).pp 13-19.


Refbacks

  • There are currently no refbacks.