Reduction of Hydrogen Embrittlement of HSLA Steel by Ion Implantation Surface Modification Technique
Keywords:
Plasma ion implantation, hardness, hydrogen diffusivity, hydrogen embrittlement, HSLA SteelAbstract
There are many techniques available for the surface modification of the substrate. One of the important ion implantation techniques is plasma source ion implantation (PSII). Ion implantation is a vacuum process in which a beam of ions is directed to the surface and introduced into it. This technique produces minimum invasion of the bulk properties of the substrate. Nitrogen plasma ion implantation treatments were done on the substrate, Cu-strengthened HSLA – 80 steel in various N-H mixtures at 100oC for 3 h. The ion implantation brought the mechanical, physical and chemical change in the substrate. This investigation showed that improvements in hydrogen embrittlement resistance could be obtained through plasma ion implantation. Plasma implantation caused incremental increase in the hardness, indicating nitrogen introduction in the substrate surface and subsurface. X-ray diffraction spectra of the treated samples revealed a shift in the primary peak indicating that the nitrogen was most probably resident as solute. The presence of nitrogen as well as surface defects produced by implantation caused a non-monotonic change in the hydrogen diffusivity. The presence of a high surface hardness possibly delayed crack initiation under hydrogen charging conditions.
Keywords: Plasma ion implantation, hardness, hydrogen diffusivity, hydrogen embrittlement, HSLA Steel
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |