Critical Assessment of Parachute Deployment: Stress Analysis Perspectives
Abstract
The goal of the Mars Science Lab (MSL) mission's parachute decelerator system is to deliver the biggest payload on the Martian surface in history. Robust analysis tools are required to estimate loads and stresses in the canopy reinforcement in order to fulfill this challenge.Two finite element codes are used in this study's structural analysis of the MSL parachute system.This study has three goals in mind. Initially, the research assesses how fabric anisotropy affects the anticipated stress distribution inside the canopy. Second, the effect of various design changes on canopy stress distribution is examined. Finally, the study provides a comparison of the stresses predicted by the two different finite element codes used for the analysis.
Keywords
Full Text:
PDFReferences
Sengupta, A., Steltzer, A., Comeaux, K., Candler, G., Pantano, C. and Bell, J. “Supersonic Delta Qualification by Analysis Program for the Mars Science Laboratory Parachute Decelerator System,” AIAA Paper 2007-2542, 19th AIAA Aerodynamic Decelerator Systems Technology Conference,May 21- 24, 2007, Williamsburg, VA.
Taeger, Y., Witkowski, A. and Kandis, M., “Mars Phoenix Scout Parachute Canopy Structural Test Peak Load Prediction Technique,” AIAA Paper 2007-2566, 19th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, May 21-24, 2007, Williamsburg, VA.
Lu, K., Accorsi, M. and Leonard, J., “Finite Element Analysis of Membrane Wrinkling,” International Journal for Numerical Methods in Engineering, Vol. 50 Issue 5, Pages 1017 – 1038, 2001.
Mullins, W., Reynolds, D., Lindh, K. and Bottorff, M., “Investigation of Prediction Methods for the Loads and Stresses of Apollo Type Spacecraft Parachutes, Volume II – Stresses,” NASA Technical Report NASA-CR-134231, NVR-6432, June 1970.
Sundberg, W., “A New Solution Method for Steady-State Canopy Structural Loads,” AIAA Paper 86- 2489, 9th AIAA Aerodynamic Decelerator and Balloon Technology Conference, Albuquerque, NM, October 7-9, 1986
Peterson, C., Waye, D., Rollstin, L. and Holt, I., “Design and Performance of a Parachute for Supersonic and Subsonic Recovery of an 800-lb Payload,” AIAA Paper 1986-2435, 9th AIAA Aerodynamic Decelerator and Balloon Technology Conference, Albuquerque, NM, October 7-9, 1986.
Heindel, K., Wolf, D. and Merced, N., “Development of a 94-ft Diameter Enhanced Ringslot Parachute,” AIAA Paper 2001-2040, AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 16th, Boston, MA, May 21-24, 2001
Behr, V., Wolf, D., Rutledge, B. and Hillebrandt, F., “Development of an 80-ft-Diameter Ribbon Drogue Parachute for the NASA X-38 Vehicle,” AIAA Paper 2001-2042, AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 16th, Boston, MA, May 21-24, 2001
Accorsi, M., Leonard, J., Benney, R. and Stein, K., “Structural Modeling of Parachute Dynamics,” AIAA Journal Vol. 38, Issue 1, Pages 139 – 146, 2000.
Witkowski, A., Kandis, M. and Accorsi, M., “Mars Scout Phoenix Canopy Stress Analyses,” AIAA Paper 2007-2528, 19th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, May 21-24, 2007, Williamsburg, VA.
Hallquist, J., LS-DYNA Theory Manual, Livermore Software Technology Corporation, Livermore, CA, 1999.Computer Methods in Applied Mechanics and Engineering 2000; 190:321–332.
Tutt, B. and Taylor, A., “The Use of LS-DYNA to Simulate the Inflation of a Parachute Canopy,” AIAA Paper 2005-1608, 18th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, May 23-26, 2005, Munich, Germany
Tutt, B., Taylor, A., Berland, J. and Gargano, B., “The Use of LS-DYNA to Assess Candidate ATPS Main Parachutes,” AIAA Paper 2005-1609, 18th AIAA Aerodynamic DeceleratorSystems Technology Conference and Seminar, May 23-26, 2005, Munich, Germany
Ewing, E., Bixby, H. and Knacke, T., “Recovery System Design Guide,” Technical Report AFFDL-TR-78-151, Air Force Flight Dynamics Laboratory, Wright-Patterson Air Force Base, OH, 1978.
Knacke, T.W., “Parachute Recovery Systems Design Manual,” Para Publishing, Santa Barbara, CA, 1992
DOI: https://doi.org/10.37591/rtfm.v10i3.7861
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Recent Trends in Fluid Mechanics