Fuzzy and PI Based Speed Control of BLDC Motor using Bidirectional Converter for Electric Vehicle Application

Authors

  • Anjana R. Student, Department of Electrical and Electronics Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Pampady, Kerala, India
  • JAYAN M. V Professor, Department of Electrical and Electronics Engineering, Rajiv Gandhi Institute of Technology, Kottayam, Pampady, Kerala, India

DOI:

https://doi.org/10.37591/.v8i3.1301

Abstract

Fuzzy logic control can be used in BLDC motor to control the four quadrants of operation so as to avoid power loss. In this study, a fuzzy based controller for speed control of BLDC motor is done, and it is compared with the conventional PI controller-based speed control technique. In addition to this, a bi-directional converter is used to achieve battery charging during regeneration and to charge the battery externally as well in two different modes of operation by controlling the converter switches gating pulses. A boost converter is also suggested to improve the power quality during charging mode from the external AC source. This is well suited for electric vehicle applications.


Keywords: Brushless DC motor, regeneration, bi-directional converter, fuzzy logic controller (FLC), CC-CV charging

Cite this Article

Anjana R., Jayan M.V. Fuzzy and PI Based Speed Control of BLDC Motor using Bidirectional Converter for Electric Vehicle Application. Trends in Electrical Engineering. 2018; 8(3): 35–45p.

 

Downloads

Published

2019-02-02

Issue

Vol. 8 No. 3 (2018)

Section

Articles

License

Journal Title:

Title of the Paper:

Corresponding Author’s Information:

Name: Address:

E-mail:

Contact Number:

It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.

This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.

I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

 I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.

I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)

1. ________________

2. ________________

3. ________________

4. ________________

The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).