Field Oriented Control of Induction Motor using DSP Processor
DOI:
https://doi.org/10.37591/.v8i1.407Abstract
This paper presents a field oriented control of an induction motor (IM) using DSP processor. Three-phase squirrel cage induction motors have been preferred due to their rugged in construction, simplicity and its robustness enables them to be used in all kinds of environments and for long duration of time. Out of various speed control techniques, field oriented control of induction motor drive is employed with fuzzy logic controller in order to achieve high performance of the drive. The conventional speed control of induction motor drive is proportional integral (PI) controller. The PI controller has some disadvantages such as high starting overshoot, sensitivity to controller gains and sluggish response. In this paper, fuzzy controller based induction motor drive is developed and implemented using TMS320F2812 DSP processor.
Keywords: Induction motor, fuzzy logic controller, PI controller, speed control, field oriented control, DSP processor
Cite this Article
Keerthana P, Vinoth G. Field Oriented Control of Induction Motor using DSP Processor. Trends in Electrical Engineering. 2018; 8(1): 14–18p.
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
