Finite Element Approach for Sheet Metal Forming and Springback: A Review
Abstract
The process by which the sheet metal blank is plastically deformed into a 3D shape by the application of external force without much change in thickness is the sheet metal forming process. The paper describes the mechanism of the sheet metal forming process. Numerical simulation of the metal forming processes has now gained the industrial importance, and it has made it possible to simulate the metal deformation and to calculate stress and strain states for complex processes. By using the FEA method, simulation of design can help to predict errors and modifications can be made at an early stage before the tooling is fabricated and tested. The paper describes the use of Finite element analysis (FEA) which is a simulation technique which evaluates the behavior of components, equipments and structures for various types of loading conditions. With the help of FEA software, springback effect is also computed. Springback is elastic recovery of sheet metal during unloading which cannot be neglected but can be minimized with help of FEA software.
Cite this Article
Akshay P. Thakare, Borlepwar PT. Finite Element Approach for Sheet Metal Forming and Springback: A Review. Trends in Machine Design. 2018; 5(1): 33–45p.
Keywords
Full Text:
Subscribers OnlyReferences
Abhinav, K. Annamalai, “Analysis of sheet metal bending by using Finite Element Method”, International Journal of Engineering Research & Technology (2013), pp.1-6
Sachin S. Kaurase, M . P. Chopade, “Design & FE Analysis of Sheet Metal While Bending”, International Journal of Engineering Research & Technology (2016), pp.90-99
Ramesh Kanttikar, Bharath S Kodli, Ravi B Chikmeti, “Analysis on Deformation Process in Deep Drawing of Sheet Metal Part by FEM”, IOSR Journal of Mechanical and Civil Engineering (2014), pp 06-16
Shishir Anwekar, Abhishek Jain, “Finite element simulation of single stage deep drawing process for determining stress distribution in drawn conical component”, International Journal of Computational Engineering Research (2012), pp. 229-236
Hakim S. Sultan Aljibori, Abdel Magdid Hamouda, “Finite element analysis of sheet metal forming process”, European Journal of Scientific Research (2009), pp.57-69
M. Tisza, “Numerical modelling and simulation in sheet metal forming”, Journal of Materials Processing Technology 151 (2004), pp58–62
Ozgur Tekaslan, Nedim Gerger, Ulvi S_eker, “Determination of spring-back of stainless steel sheet metal in ‘‘V’’ bending dies”, Materials and Design 29 (2008), pp. 1043–1050
Gawade Sharad, V. M. Nandedkar, “Spring back in Sheet Metal Bending-A Review”, IOSR Journal of Mechanical and Civil Engineering, pp: 53-56
Volkan Esat_, Haluk Darendeliler, Mustafa Ilhan Gokler, “Finite element analysis of springback in bending of aluminium sheets”, Materials and Design 23 (2002) pp:223-229
M. Satyanarayana Gupta, D. Ramana Reddy, “Design and analysis of aircraft sheet metal for
spring back effect”, Materials Today: Proceedings 4 (2017), pp. 8287–8295
ShirishGhimire, YogeshEmeerith, Rohit Ghosh,Sushovan Ghosh, “Finite Element Analysis of an Aluminium Alloy Sheet in a V-Die Punch Mechanism Considering Spring-Back Effect”, International Journal of Theoretical and Applied Mechanics (2017), pp. 331-342.
Dametew AW, Gebresenbet T, “Study the Effects of Spring Back on Sheet Metal Bending using Mathematical Methods”, Journal of Material Sciences & Engineering (2017), pp.1-7
M. Math, B. GRizelj, “Finite element approach in bending process”, Journal of materials processing technology (2002), pp.778-784
S.K. Panthi, N. Ramakrishnana, K.K. Pathak, J.S. Chouhan, “An analysis of springback in sheet metal bending using finite element method (FEM)”, Journal of Materials Processing Technology 186 (2007), pp.120–124
Nor Assikin Khamis, Suziyani Md Zin, Abdul Rahim Bahari, “Mild steel sheet metal forming using abaqus software: influence of drawbeads in minimize springback”, ARPN Journal of Engineering and Applied Sciences, (2016), pp. 11888-11893
Prabhakar.A, Dr. Mohamed Haneef, Shabbir Ahmed R.M, “Sheet metal forming analyses with spring-backm deformation on U-Bends in Isotropic plates”, International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 9, September 2013
Mohamed Faraj Alfaidi, L Xiaoxing, “Determination of springback in sheet metal forming”, The annals of “dunarea de jos” university of galati fascicle v, technologies in machine building,(2009), pp.129-13
Tomasz Trzepiecinski, Hirpa G. Lemu, “Effect of Computational Parameters on Springback Prediction by Numerical Simulation”, metals (2017), pp.1-7
DOI: https://doi.org/10.37591/tmd.v5i1.482
Refbacks
- There are currently no refbacks.