Oil lubricating tribology And additives for lubricating oil
Abstract
Numerous goods that are characterised by hundreds of basic chemicals and additions fall under the umbrella phrase "lubricating oil." Lubricating oils can either be synthetic or mineral-based. This article focuses on petroleum-based lubricating oils, which are composed of 80–90% petroleum hydrocarbon distillates and 10–20% additives and are used to lubricate a variety of internal combustion engines. Lubricating oil exposure occurs mostly through inhalation and skin contact in both occupational and general populations. Eye, skin, and respiratory tract irritation have all been linked to acute exposure. Given that several of the tested lubricating oils were carcinogenic, they should be properly labelled as potentially cancerous.
As with any functional component, lubrication can be seen as an essential component of a machine. In order to satisfy the demands of modern high speed production, it goes without saying that the many bearings, gears, and cams that make up any machine today must be meticulously planned and finely constructed of the best materials. However, these same working parts would quickly experience rapid wear and eventually fail without sufficient lubrication. The machine would thereafter be ineffective as a tool for production.
Keywords
Full Text:
PDFReferences
Abdullah MIHC, Abdollah MF, Amiruddin H, Tamaldin N, Nuri NRM (2014) Effect of hBN/Al2O3 nanoparticle additives on the tribological performance of engine oil. Jurnal Teknologi 66(3):1–6.
Abdullah MIHC, Abdollah MFB, Tamaldin N, Amiruddin H, Mat Nuri NR, Gachot C, Kaleli H (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil Industrial Lubrication and Tribology 68(4):441–445.
Ali MKA, Xianjun H (2015) Improving the tribological behavior of internal combustion engines via the addition of nanoparticles to engine oils. Nanotechnol Rev 4:347–358.
Alves SM, Barros BS, Trajano MF, Ribeiro KSB, Moura E (2013) Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions. Tribol Int 65:28–36.
Arumugam S, Sriram G (2014) Synthesis and characterization of rapeseed oil bio-lubricant dispersed with nano copper oxide: its effect on wear and frictional behavior of piston ring–cylinder liner combination. Proc Inst Mech Eng Part J 228:1308–1318.
Azman SSN, Zulkifli NWM, Masjuki H, Gulzar M, Zahid R (2016) Study of tribological properties of lubricating oil blend added with graphene nanoplatelets. J Mater Res.
Castillo Marcano SJ, Bensaid S, Deorsola FA, Russo N, Fino D (2014) Nanolubricants for diesel engines: related emissions and compatibility with the after-treatment catalysts. Tribol Int 72:198–207.
Çelik ON, Ay N, Göncü Y (2013) Effect of nano hexagonal boron nitride lubricant additives on the friction and wear properties of AISI 4140 steel. Part Sci Technol 31:501–506.
Cho Y, Park J, Ku B, Lee J, Park W-G, Lee J, Kim SH (2012) Synergistic effect of a coating and nano-oil lubricant on the tribological properties of friction surfaces. Int J Precis Eng Manuf 13:97–102.
Z. Tang, S. Li.A review of recent developments of friction modifiers for liquid lubricants (2007–present).Curr Opin Solid State Mater Sci, 18 (2014), pp. 119-139.
L. Rapoport, V. Leshchinsky, M. Lvovsky, O. Nepomnyashchy, Y. Volovik, R. Tenne.Mechanism of friction of fullerenes.Ind Lubr Tribol, 54 (2002), pp. 171-176.
Z.S. Hu, R. Lai, F. Lou, L. Wang, Z. Chen, G. Chen, et al..Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive.Wear, 252 (2002), pp. 370-374.
B. Ginzburg, L. Shibaev, O. Kireenko, A. Shepelevskii, M. Baidakova, A. Sitnikova.Antiwear effect of fullerene C 6 0.additives to lubricating oils.Russ J Appl Chem, 75 (2002), pp. 1330-1335.
R. Rastogi, M. Yadav, A. Bhattacharya.Application of molybdenum complexes of 1-aryl-2, 5-dithiohydrazodicarbonamides as.extreme pressure lubricant additives.Wear, 252 (2002), pp. 686-692.
K. Fangsuwannarak, K. Triratanasirichai.Effect of metalloid compound and bio-solution additives on biodiesel engine.performance and exhaust emissions.Am J Appl Sci, 10 (2013), p. 1201.
Spikes, Hugh (1 October 2015). "Friction Modifier Additives" (PDF). Tribology Letters. 60 (1): 5. doi:10.1007/s11249-015-0589-z. hdl:10044/1/25879. ISSN 1023-8883. S2CID 137884697.
Donnet, C.; Erdemir, A. (2004). "Historical developments and new trends in tribological and solid lubricant coatings". Surface and Coatings Technology. 180–181: 76–84. doi:10.1016/j.surfcoat.2003.10.022.
Nalam, Prathima C.; Clasohm, Jarred N.; Mashaghi, Alireza; Spencer, Nicholas D. (2010). "Macrotribological Studies of Poly(L-lysine)-graft-Poly(ethylene glycol) in Aqueous Glycerol Mixtures" (PDF). Tribology Letters. 37 (3): 541–552. doi:10.1007/s11249-009-9549-9. hdl:20.500.11850/17055. S2CID 109928127.
Lee, Tim (7 June 2020). "Safflower oil hailed by scientists as possible recyclable, biodegradable replacement for petroleum". ABC News. Landline. Australian Broadcasting Corporation. Retrieved 7 June 2020.
Moorey, Peter Roger Stuart (1999). Ancient Mesopotamian Materials and Industries: The Archaeological Evidence. Eisenbrauns. ISBN 9781575060422.
Harvard Mechanical Engineering Page Archived 21 March 2007 at the Wayback Machine. Harvard.edu. Retrieved 19 June 2006.
"Codes of Ethics and Conduct". Online Ethics Center. Archived from the original on 19 June 2005. Retrieved 24 July 2005.
Occupational Employment and Wages, 17-2141 Mechanical Engineers. U.S. Bureau of Labor, May 2012. Retrieved 15 February 2014.
Tsouknidas, A., Savvakis, S., Asaniotis, Y., Anagnostidis, K., Lontos, A., Michailidis, N. (2013) The effect of kyphoplasty parameters on the dynamic load transfer within the lumbar spine considering the response of a bio-realistic spine segment. Clinical Biomechanics 28 (9–10), pp. 949–955.
DOI: https://doi.org/10.37591/tmet.v12i2.6656
Refbacks
- There are currently no refbacks.