Cutting-Edge Brilliance: Applications of Diamond Coating in Precision Machining

Authors

  • T R Vijayaram Professor, Department of Mechanical Engineering, School of Mechanical Engineering, BIST, BIHER, Bharath University, Selaiyur, Chennai 600073, Tamil Nadu, India

DOI:

https://doi.org/10.37591/tmet.v13i3.7707

Keywords:

Diamond coating, glass, plastic, Vapor Deposition, ion-beam

Abstract

Diamond coating technology is used to deposit a uniform layer of diamond on almost any type of material ranging from glass and plastic to metals. The process involves utilizing atmospheric carbon dioxide as the carbon source and exposing it to a series of laser beams. With the ease of applying paint on a brush, this laser-assisted process produces pure diamond and bonds it to a material's surface. This study examines the main characteristics of diamond coatings, their benefits, and drawbacks, as well as current developments and potential applications, by a thorough analysis of the literature. Through a comprehensive analysis of extant literature and case studies, this study seeks to provide significant perspectives on the application of diamond coatings to attain elevated levels of accuracy, efficiency, and quality in manufacturing processes. This review examines the benefits, applications, and advancements in diamond coating processing in a range of engineering domains.

References

Faraz, A.; Biermann, D.; Weinet, K. Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates. Int. J. Mach. Tools Manuf. 2009, 49, 1185–1196.

Tsao, C.C.; Kuo, K.L.; Hsu, I.C. Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core-saw drill. Int. J. Adv. Manuf. Technol. 2012, 59, 617–622.

Iliescu, D.; Gethin, D.; Gutierrez, M.E.; Girot, F. Modeling and tool wear in drilling of CFRP. Int. J. Mach. Tools Manuf. 2010, 50, 204–213.

Tsao, C.C. Experimental study of drilling composite materials with step-core drill. Mater. Des. 2008, 29, 1740–1744.

Grigoriev, S.N.; Vereschaka, A.A.; Fyodorov, S.V.; Sitnikov, N.N.; Batako, A.D. Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano- structured and gradient coatings produced by using of various deposition methods. Int. J. Adv.Manuf. Technol. 2017, 90, 3421–3435.

K Kanda etal., Application of diamond coated cutting tools, Surface and coatings technology,Volume 73, Issues 1–2, July 1995, Pages 115-120, https://doi.org/10.1016/0257-8972(94)02370-0

Tagliaferri V, Caprino G, Diterlizzi A. Effect of drilling parameters on the finish and mechanical properties of GFRP composites. International Journal of Machine Tools and Manufacture. 1990 Jan 1;30(1):77-84.

Capello E. Workpiece damping and its effect on delamination damage in drilling thin composite laminates. Journal of Materials Processing Technology. 2004 May 15;148(2):186-95.

Malhotra SK. Some studies on drilling of fibrous composites. Journal of Materials Processing Technology. 1990 Dec 1;24:291-300.

Babu PR, Pradhan B. Effect of damage levels and curing stresses on delamination growth behaviour emanating from circular holes in laminated FRP composites. Composites Part A: applied science and manufacturing. 2007 Dec 1;38(12):2412-21.

Downloads

Published

2024-03-11

Issue

Vol. 13 No. 3 (2023)

Section

Review Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.