Open Access Open Access  Restricted Access Subscription or Fee Access

Role of Filler-Polymer Interface on the Thermal Conductivity in Polymer Composites

Vijendra Kumar, Abhishek Barnwal, R. K. Shukla, Jyoti Shakya

Abstract


Polymers with high thermal conductivity are the need of modern technologies due to their robustness, cost-effective, and less corrosiveness. However, bare polymers are not good heat-conductors due to their molecular structures, and their non-metallic properties.  Therefore, metallic fillers of different shape and size have been used to enhance the thermal conductivity in polymer-composites. However, there has been search of best geometrical fillers which can maximize the thermal conductivity effectively with same volume percent. From our numerical simulations, we show that the best geometrical fillers are those which have high surface-area (S) to volume (V) ratio. In such cases the interface of polymer-filler is maximized, which leads to the effective enhancement in the thermal conductivity. To validate our claim we use fillers with same volume percent but maximize the surface area. We also show that there is a competition between surface and the bulk of the filler in this maximization process but surface-area dominates with an effective increase in the thermal conductivity. We use 3-dimensional models using ANSYS-Fluent to show the characteristic behavior of thermal conductivity. Polyethylene has been used as the base polymer and aluminum (Al) has been used as filler in all our model simulation.

 


Keywords


Polymer composites, Fillers, 3-dimensional models, Thermal conductivity, Polyethylene, Aluminum(Al)

Full Text:

PDF

References


S. Zhai, P. Zhang, Y. Xian, J. Zeng, B. Shi, Effective thermal conductivity of polymer composites: theoretical models and simulation models, Int. J. Heat Mass Transfer. 117 (2018) 358-374.

X. Wang, H. Liu, X. Qiu, L. Wang, lia. Wang, Thermal conductivity of filled composite materials considering interactions between fillers, Appl. Therm. Eng. 141, (2018) 835-843

X.J. Wang, L.Z. Zhang, L.X. Pei, Thermal conductivity augmentation of composite polymer materials with artificially controlled filler shapes, J. Appl. Polym. Sci. 131, (2013), 39550.

L.Z. Zhang, X.J. Wang, Y.Y. Quan, L.X. Pei, Conjugate heat conduction in filled composite materials considering interactions between the filler and base materials, Int. J. Heat Mass Transfer. 64, (2013) 735-742.

L.Z. Zhang, X.J. Wang, L.X. Pei, Nonlinear programming optimization of filler shapes for composite materials with inverse problem technique to maximize heat conductivity, Int. J. Heat Mass Transfer. 55, (2012) 7287-7296.

X.J. Wang, The effect of the prismatic filler arrangement and cross-sectional shape on the thermal conductivity of polymer composites, Express Polym Lett. 12, (2014) 920-931.

Z. Tong, M. Liu, H. Bao,A numerical investigation on the heat conduction in high filler loading particulate composites, Int. J. Heat Mass Transfer. 100, (2016), 355-361.

Z. Rao, B. Chen, J. Zhao, A series of generalized correlations for predicting the thermal conductivity of composite materials packing with artificially designed filler shapes, Appl. Therm. Eng. 120, (2017) 444-452.

A.R.J. Hussain, A.A. Alahyari, S.A. Eastman, C.T. Erkey, S. Johnston, M. Sobkowicz, Review of polymers for heat exchanger applications: factors concerning thermal conductivity, J. Appl. Therm. Eng. 113, (2017), 1118-1127.

T. Oppelt, T. Urbaneck, H. Böhme, B. Platzer, Numerical investigation of effective thermal conductivity for two-phase composites using a discrete model, Appl. Therm. Eng. 115,(2017) 1-8.

X. Chen, Y. Su, D. Reay, S. Riffat, Recent research developments in polymer heat exchangers – A review, RENEW SUST ENERG REV. 60, (2016) 1367-1386.

H. S. Kim, J. H. Kim, W. Y. Kim, H. S. Lee, S. Y. Kim, M. S. Khil, Volume control of expanded graphite based on inductively coupled plasma and enhanced thermal conductivity of epoxy composite by formation of the filler network, Carbon. 119, (2017) 40-46.

J. Gu, X. Yang, Z. Lv, N. Li, C. Liang, Q. Zhang, Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity, Int. J. Heat Mass Transfer. 92, (2016) 15-22.

C. Yang, X.H. Yin, X.P. Li, Z. Zhang, J.W. Kan, G.M. Cheng, Simulation study on flow dependent thermal conductivity of PC/MWCNTs nanocomposites considering interface topography, Appl. Therm. Eng. 100, (2016) 1207-1218.

A. Agrawal, A. Satapathy, Mathematical model for evaluating effective thermal conductivity of polymer composites with hybrid fillers, INT J THERM SCI. 89, (2015) 203-209.

H. Chen, V. V. Ginzburg, J. Yang, Y. Yang, W. Liu, Y. Huang, L. Du, B. Chen, Thermal conductivity of polymer-based composites:Fundamentals and applications, Progress in Polymer Science. 59, (2016) 41-85.

J.C. Maxwell, A treatise on electricity and magnetism Unabridged, Dover, New York. (1954).

H.W. Russell, Principles of heat flow in porous insulators, J. Am. Ceram. Soc. 18, (1935) 1-5.

A.B. Baschirow, A.M. Manukian, Thermal conductivities of polymers at various temperatures and pressures, Mech. Polim. 3, (1974) 564-566.

D.A.G. Bruggeman, Dielectric constant and conductivity of mixtures of isotropic materials, Ann. Phys. 24, (1953) 636-669.

J.C. Halpin, Stiffness and expansion estimates for oriented short fiber composites, J. Compos. Mater. 3, (1969) 732-734.

G.S. Springer, S.W. Tsai, Thermal Conductivities of Unidirectional Materials, J. COMPOSITE MATERIALS. 1, (1967), 166-173.

Y. Agari, T. Uno, Estimation on thermal conductivities of filled polymers, J. Appl. Polym. Sci. 32, (1986) 5705-5712.

Y. Agari, A. Ueda, S. Nagai, Thermal conductivity of apolyethylene filled with disoriented short-cut carbon fibers, J. Appl. Polym. Sci. 43, (1991) 1117-1124.

Y. Agari, A. Ueda, S. Nagai, Thermal conductivities of composites in several types of dispersion systems, J. Appl. Polym. Sci. 42, (1994) 1665-1669.

T.B. Lewis, L.T. Nielsen, Dynamic mechanical properties of particulate-filled composites, J. Appl. Polym. Sci. 14, (1970) 1449-1471.

L. Nielsen, The thermal and electrical conductivity of two-phase systems, Ind. Eng. Chem. Fundam. 13, (1974) 17-20.




DOI: https://doi.org/10.37591/jopc.v8i1.3821

Refbacks

  • There are currently no refbacks.