Open Access
Subscription or Fee Access
Optimal Selection of Electric Motor & Battery for EV Drive Train
Abstract
Due to increased environmental awareness, electricyvehicles are growing more popular over time. Electric automobile consists primarily of a motor and a
batteryysubsystem components for electric propulsion as well as the energy sourceysubsystem. In thisypaper the performance of two motors, the PM motor and the Induction motoryand the battery (Li-ion, NiMH,Lead-acid, Ni-Cd) have been Simulate by electric vehicle applications using ADVISOR (Advanced Vehicle Simulator) software. The phenomena of decision-making for suitable electric motoryand battery observable in all major aspects of electric vehicles performance characteristics such as gradeability and maximumyspeed, maximum acceleration,
andySOC (state of charge).
Keywords
References
M. Yaich, M. R. Hachicha, and M. Ghariani, “Modeling and simulation of electric and hybrid
vehicles for recreational vehicle,” 16th Int. Conf. Sci. Tech. Autom. Control Comput. Eng. STA
, pp. 181–187, 2016, doi: 10.1109/STA.2015.7505098.
A. Wong, “Component Selection for an Electric 4Wd Vehicle,” pp. 1–10, 2017.
R. A. Hanifah, S. F. Toha, and S. Ahmad, “Electric Vehicle Battery Modelling and Performance
Comparison in Relation to Range Anxiety,” Procedia Comput. Sci., vol. 76, no. Iris, pp. 250–256, 2015, doi: 10.1016/j.procs.2015.12.350.
G. Soares Dos antos, F. Jose Grandinetti, R. Augusto Rocha Alves, and W. De Queiroz Lamas,
“Design and simulation of an energy storage system with batteries lead acid and lithium-ion for
an electric vehicle: Battery vs. conduction cycle efficiency analysis,” IEEE Lat. Am. Trans., vol.18, no. 8, pp. 1345–1352, 2020, doi: 10.1109/TLA.2020.9111669.
International Energy Agency, “Global EV Outlook 2021 - Accelerating ambitions despite the
pandemic,” Glob. EV Outlook 2021, p. 101, 2021, [Online]. Available:https://iea.blob.core.windows.net/assets/ed5f4484- f556-4110-8c5c- 4ede8bcba637/GlobalEVOutlook2021.pdf
F. Un-Noor, S. Padmanaban, L. Mihet-Popa, M. N. Mollah, and E. Hossain, “A comprehensive study of key electric vehicle (EV) components, technologies, challenges, impacts, and future
direction of development,” Energies, vol. 10, no. 8, pp. 1–82, 2017, doi: 10.3390/en10081217.
S. Bradai, M. Ghariani, and A. Guermazi, “Study of the traction chains of different models of electric vehicles with the ADVISOR tool,” IREC 2016 - 7th Int. Renew. Energy Congr., 2016, doi:
1109/IREC.2016.7478878.
T.A., Khan, Khan T.A., Yadav, A.K. A hydrodynamic cavitation-assisted system for optimization of biodieselm production from green microalgae oil using a genetic algorithm and response surface methodology approach, Environmental Science and Pollution Research, doi.org/10.1007/s11356-022-20474-w2022 , 2022
A.K. , Yadav, Khan, M.E., Pal A., Biodiesel Production from Oleander (Thevetia Peruviana) Oil and Its Performance Testing on a Diesel Engine, Korean J. Chem. Eng., 2017; 34(2):340-345
Yadav A.K., Dewangan A., & Mallick A., Effect of n- Butanol and Diethyl Ether Additives on Performance and Emission Characteristics of a Diesel Engine Fuelled with Diesel-Pongamia Biodiesel Blends. Journal of Energy Engineering, (2018), 144 (6), 04018062 (Publisher–ASCE-ASME; SCI Indexed)
A.K., Yadav, Dewangan A., & Mallick A., Synthesis and Stability Study of Biodiesel from Kachnar Seed Oil, Journal of Energy Engineering. (2018), 144 (5), 04018053
Yadav, A.K., Khan, M.E., Pal A., Ultrasonic Assisted Production of Biodiesel from Karabi Oil using Heterogeneous Catalyst, Biofuels, 2018:9;101–112
Yadav, A.K., Vinay, Singh, B., Optimization of Biodiesel Production from Annona Squamosa Seeds Oil Using Response Surface Methodology and Its Characterization" Energy Sources, Part A. 2018; 40(9) 1051-1059
A.K., Yadav , Khan T.A., Khan T.A., and Kumar S., Methyl ester of Gmelina arborea oil as a substitute for petroleum diesel: an experimental study on its performance and emissions in a diesel engine, Energy Sources, Part A, doi:10.1080/15567036.2019.1636164
Yadav, A.K., Khan, M.E., Pal A., Custard Apple Seed (Annona Squamosa) Oil as a Promising Feedstock for Biodiesel Production using Advanced Techniques and Its
Experimental Investigations on an Agricultural Diesel Engine., Int. J. of Oil, Gas and Coal Tech., 2019: 20(4) 473-492
A., Dewangan, Yadav A.K. & Mallick A., Optimization of Biodiesel Production and Engine Performance from Underutilized Simarouba Oil in Compression Ignition Engine, Int. J. Oil, Gas and Coal Tech., 2020: 25(3) 357
Khan ,I. A., Singh S. K., Yadav A. K., Efficient Production of Biodiesel from Cannabis Sativa oil using Intensified Transesterification (Hydrodynamic 8 Cavitation) Method, Energy Sources, Part A, DOI:10.1080/15567036.2019.1607946
Dewangan, A., Mallick, A., Yadav, A. K., Comparative study of Manilkara Zapota and Karanja based Biodiesel Properties and Its Effect on Multi-Cylinder Diesel Engine Characteristics. Energy Sources, Part A, DOI.10.1080/15567036.2019.1661551
Singh, S., Singh, B., Kumar, S., and Yadav, A.K., Temperature-dependent dynamic hysteresis scaling of ferroelectric hysteresis parameters of lead free [(Ba 0.825 + xCa0.175-x) (Ti1- x Snx)O3]ceramics, Ferroelectrics, 2019, Vol. 551, 133–142
Vinay, Singh B., Yadav, A. K., Optimization of Performance and Emission Characteristics of CI Engine Fuelled with Mahua Oil Methyl Ester-Diesel Blend using Response Surface Methodology, Int. J. of Ambient Energy (2020) 674-85 44(6)
I. A., Khan, Singh S. K., Yadav A. K., & Sharma D.,Enhancement in the Performance of a Diesel Engine Fueled with Pongamia Methyl Ester and n-Butanol as Oxygenated Additive, Int. J. of Ambient Energy, 2019, 40(8), 842–846
A. K., Yadav, Singh, S., Gupta, G. Ghosh, U., Generation of Electricity through Staircase. Advance Science Letter , 2014;20: 1303–1306
Yadav, A.K., Khan, M.E., Pal A., Sharma D., Optimization of biodiesel production from bitter
groundnut oil using Taguchi method and its performance and emissions characteristics on a 4-cylinder Tata Indica engine. Int. J. Sust. Agri. Mgt. and Informatics, (2015), 1, .285–300
A.K., Yadav, Khan, M.E., Pal A., Performance and
Emission Characteristics of a Stationary Diesel Engine fuelled by Schleichera Oleosa oil Methyl Ester (SOME) Produced through Hydrodynamic Cavitation Process, Egypt. J. of Petroleum, (2018): 27; 89–93 A.K., Yadav, Khan, M.E., Pal A., Kaner biodiesel production through
hybrid reactor and its performance testing on a CI engine at different compression ratios. Egypt. J. of Petroleum, 2017; 26, 525–532
Khan T.A, Yadav, A. K., Khan, M.E., Experimental Studies on Utilization of Neochloris Oleoabundans Microalgae Biodiesel as an Alternative Fuel for Diesel Engine, , Int. J. of Ambient energy, doi;10.1080/01430750.2022.2120909
A., Dewangan, Mallick, A., Yadav, A. K., Effect of Metal Oxide Nanoparticles and Engine Parameters on the Performance of a Diesel Engine: A Review, Materials Today: Proceedings, 2020;21; 1722-27
Dewangan, A., Mallick, A., Yadav, A. K., Combustion-Generated Pollutions in CI Engine and Strategy for Its Control: A Review, Materials Today: Proceedings 2020:21; 1728-33
Khan T.A., Yadav, A. K., Khan, M.E., A comprehensive review on performance, emission and combustion characteristics of diesel engines fuelled with algae oil and methyl ester, WEENTECH Proceedings in Energy, 6 (2) (2020) 160-168
Kumar, N., A. K. Yadav, A. Dewangan, and M. Kumar, CFD Based Investigation of Thermophoresis Effect on Microparticles in Micro Channel, Advances in Mechanical and Energy Technology, Springer, Lecture Notes in Mechanical Engineering, pp. 285-296, DOI:
https://doi.org/10.1007/978-981-19-1618-2_31, June 2022, Springer
Dewangan, A., B. Singh, A. Srivastava, A. Srivastava, A. K. Yadav, A Broad Review of Biodiesel Feedstocks with Competency to Replace Diesel, Advances in Mechanical and Energy Technology, Springer, Lecture Notes in Mechanical Engineering, pp. 323-331 DOI:,
https://doi.org/10.1007/978-981-19-1618-2_28, June 2022, Springer
Ahmad, A., A. Singh, D. K. Singh & A. K. Yadav, An Experimental Investigation of the Effect of Diethyl Ether as an Additive on the Performance of a Single Cylinder Diesel Engine, Recent Trends in Thermal and Fluid Sciences, Lecture Notes in Mechanical Engineering, pp.
–75, DOI: 10.1007/978-981-19-3498-8_7, Nov.2022. Springer
Singh, S., A. K. Yadav, N. Kumar , U.K. Choudhury, M.Kumar, Investigation on lead free ferroelectric [(Ba0.825+xCa0.175-x)(Ti1-xSnx)O3] ceramics for energy storage density and thermal energy harvesting capacity, Recent Advances in Manufacturing and Thermal Engineering, Lecture Notes in Mechanical Engineering, Feb. 2023, Springer
Yadav, A.K., Optimum Production of Biodiesel from an Underutilized and Potential Feed stock, Kusum Seed Oil., Iranica Journal of Energy and Environment 8(1): 6- 10, 2017
Yadav, A.K., S Singh, G Gupta, Solar Air-Conditioning: Design for a Compressor-Less System using, Peltier Effect, International Journal of Advance Research and Innovation, Volume 2, Issue 2 (2014) 429-432
Khan T.A., Yadav, A.K, Khan, T.A., Khan M.E. Microalgae: A Promising Third Generation Renewable Energy Source for I.C. Engines , Journal of Automobile Engineering and Applications, (2020) 7(1);1-5,
DOI: https://doi.org/10.37591/joaea.v9i3.6887
Refbacks
- There are currently no refbacks.