Inhibitors for steel implements

Authors

  • Kalpana Mahato Associate Professor, Department of Science & Humanity
  • Bangshidhar goswami Assistant Professor, Department of Mechanical Engineering

Keywords:

Polymers, Corrosion, Inhibitors, Deepwater, Film, High-temperature, Oil and gas wells, High pressure, Organic, Autoclave, Carbon Steels, Pipeline Steels, CO2 Environment, Amphiphilic, Muds.

Abstract

Oil and gas industries use corrosion inhibitors made of active inhibitor intermediate, carboxylic acid, demulsifier and surfactant in aromatic solvent, and alcohol. High pressure and high temperature oil well flow lines are made of steel pipes. These pipes are prone to corrosion from gaseous contamination, oil quality, flow rate, developed shear stress of turbulence, pump spar techniques, etc. Carbon dioxide to carbolic acid conversion at below 100oC temperature appears to be cause of corrosion in steel pipelines at subsea in presence of water or water contaminated oil of aged oil wells. About fifty percent expenses may be reduced by use of inhibitors to corrosion in pipe lines. Localized pitting corrosion appears to be major cause of structural failures in flow lines.

Author Biographies

  • Kalpana Mahato, Associate Professor, Department of Science & Humanity
    RVS College of Engineering and Technology, Jamshedpur
  • Bangshidhar goswami, Assistant Professor, Department of Mechanical Engineering
    RVS College of Engineering and Technology, Jamshedpur

References

S.A. Umoren; The Open Corrosion Journal, 2 (2009) 175-188.

Sunder Ramachandran; Carlos Menendez; Vladimir Jovancicevic and Jeff Long; J Petrol Explor Prod Technol; 2 (2012) 125–131.

S.Papavinasam and R.W.Revie; International Pipeline Conference; [Proc. Conf.] — Volume I; ASME 1998; IPC1998-2041; Minister of Natural Resources Canada, (1998); 341

Huey J. Chen; Tao Hong and W. Paul Jepson; Paper no. 00035; Corrosion 2000; ©2000 by NACE; International Conferences Division, P.O. Box 218340, Houston, Texas 77218-8340.

Yuanhua Lin, Ambrish Singh, Eno E. Ebenso, M. A. Quraishi, Ying Zhou, Yun Huang; Int. J. Electrochem. Sci., 10 (2015) 194 – 208

Yoon-Seok Choi, Shokrollah Hassani, Thanh Nam Vu, and Srdjan Nesic; ©2017 by NACE International; Corrosion conference & expo 2017; [Proc. Conf.]; Paper no. 9153.

Qingzhen Du, Gang Xie, Xuanqi Yan, Lili Zhang, Yuhong Pei, Fang Shang, Yanjun

Wang, Hongkui Li and Shanfeng Chen; Journal of Chemical and Pharmaceutical Research, 7(8)(2015) 1062-1068.

Mahmood Amani, Abdul Salam Abd, Abdulrahman Al-Hardan, Alireza Roustazadeh, Rommel Yrac; Journal of Petroleum & Environmental Biotechnology; J Pet Environ Biotechnol 2016, 7:5.

Abdul Salam M. Abd, Abdulrahman Al-Hardan, Alireza Roustazadeh, Mahmood Amani; Energy and Environment Pillar; Quatar foundation annual research conference; [Proc. Conf.]; ARC '16.

Attila Palencsár; Egil Gulbrandsen; Kateřina Kosorú; Paper No. 2610; [Proc. Conf.]. 2013 by NACE International; Corrosion 2013 conference & expo.

M.P. Desimone, G. Gordillo, S.N. Simison; Corrosion Science; 53 (2011) 4033–4043.

Jiabin Han, J. William Carey and Jinsuo Zhang; LA-UR Approved; for public release; 11-00644; Operated by Los Alamos National Security, LLC for the U.S. Department of Energy's NNSA; Los Alamos National Laboratory.

O Gómez, H Aponte, E Vera and Y Pineda; IOP Conf. Series: Journal of Physics: Conf. Series; [Proc. Conf.]; 935 (2017) 012060; IMRMPT; IOP Publishing.

L.A. Skogsberg and B.P. Miglin; S. Ramachandran and K.A. Bartrip; Paper no. 1005; Corrosion 2001.

Downloads

Published

2019-09-03

Issue

Vol. 6 No. 2 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.