Steel inhibitors of gas well steels

Authors

  • Bangshidhar Goswami Assistant Professor, Department of Mechanical
  • Kalpana Mahato Associate Professor, Department of Science & Humanity

Keywords:

Subsea, Pipe lines, Corrosion, Inhibitors, Green, Autoclave, Oil, Gas, Flow loop, Adsorption

Abstract

Corrosion inhibitor is chemical compound or substance that, when added in small concentration to an environment, effectively decreases the corrosion rate. Multiphase oil and gas well flowlines at subsea has studied to corrode by contamination of CO2 gas at different temperature, partial pressure, velocity of flow and properties of scale formed at inner wall. Irrecoverable localized corrosions cause failure of structures those are beyond effects of corrosion inhibitors. Pollution of cost effective inhibitors alert to use green inhibitors during life line of wells. Larger diameter long distance flow stream pipe lines are affected by variation in well parameters depending on time.

Author Biographies

  • Bangshidhar Goswami, Assistant Professor, Department of Mechanical
    RVS College of Engineering and Technology, Jamshedpur
  • Kalpana Mahato, Associate Professor, Department of Science & Humanity

    RVS College of Engineering and Technology, Jamshedpur

References

Christian Falck, Terje Kleppe and Jarleiv Maribu, Statoil; NO 9705599; NEI NO 884.

Shangbi Peng, Zhaoxiong Zeng; Petroleum; 1 (2015) 75e81.

www.keaipublishing.com/en/journals/petlm

Rolf Nyborg; Institute for Energy Technology; BUSINESS BRIEFING: EXPLORATION & PRODUCTION: THE OIL & GAS REVIEW; (2005)–ISSUE 2.

Ivana jevremović, Marc singer, Mohsen achour, Srđan nešić, Vesna mišković-stanković; Review paper; ISSN 0351-9465, E-ISSN 2466-2585; Zastita Materijala; 57 (2) (2016) 195 – 204.

Yue Chen; Paper no. 12; Corrosion 99.

Michael Swidzinski; Bob Fu and Audrey Taggart; W. Paul Jepson; Paper no. 70; Corrosion 2000.

Maritza Lopez, J.; Porcayo-Calderon, M.; Casales-Diaz; Irene Carrillo; J. Canto, L.M. Martinez de la Escalera; C. Cuevas-Arteaga; I. Regla; R.M. Melgoza-Aleman; L. Martinez-Gomez; Int. J. Electrochem. Sci.; 10 (2015) 7166 – 7179.

Ibeawuchi, I. I.; International Journal of Chemistry; 01 (2013); ISSN 2306-6415.

L. SMITH; British Corrosion Journal; 34 (4) (1999) 247 – 253. ISSN 0007-0599.

Osokogwu, U, Oghenekaro .E.; International Journal of Scientific & Technology Research; 1 (4) (2012); ISSN 2277-8616.

Joanna Brzeszcz, Anna Turkiewicz; Oil and Gas Institute – National Research Institute; NAFTA-GAZ, ROK LXXI, Nr 2 / (2015) 67 – 75.

Downloads

Published

2019-09-03

Issue

Vol. 6 No. 2 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.