Adopting Appropriate Gradation in Design of Bituminous Concrete Mixes at Constant Combined Index determined Corresponding to Actual Aggregate Size

Authors

  • Mohamed Ilyas Anjum

Abstract

The MoRTH in India specifies gradation tables for preparing bituminous mixes with desirable range of aggregates passing for each aggregate fraction. Conventionally, the mix is designed by adopting midpoint of the specified range of aggregates passing, anticipating a satisfactory mix and avoid several trials required to arrive at the best gradation within the specified range. In this approach, the aggregate shape factors expressed as combined index being the sum of flaky and elongation indices of aggregates in the mix, are determined using conventional instruments. The limitation is that the slot sizes available on instruments are not the same as the sieve sizes in gradation tables. In spite of this, the shape factors determined are still assumed to be approximately the same as those for the actual aggregates sizes, example available is 25–20 mm while size required is 26.5–19 mm. As such, an attempt was made to determine the shape factors for the actual aggregates sizes and ascertain if the midpoint gradation approach is still valid. Bituminous concrete mixes were prepared corresponding to the midpoint (MG) as well as the lower (LG) and higher (HG) limits besides the mid points of lower – mid point (LMG) and higher - mid point (HMG) gradations by using same aggregates. All the other materials and their properties were maintained uniform. The Marshall Test properties of bituminous concrete mix–grade 1, at these five gradations were compared. It was noted that the conventional midpoint gradation does not produce the most satisfactory mix.
Keywords: aggregates shape factors, aggregates gradation, bituminous concrete mix, midpoint gradation

Downloads

Published

2021-01-16

Issue

Vol. 3 No. 2 (2013)

Section

Research Article

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.