Heterogeneous Teleoperation Model for Controlling 3D Printed Humanoid Robot Arm with 5 DOF using 3 DOF Exoskeleton
DOI:
https://doi.org/10.37591/joci.v10i2.2603Abstract
The main objectives of the present work are to model and implement a control system of five degrees of freedom (5 DOF) humanoid arm by using an exoskeleton system with 3 DOF. The exoskeleton system is used to transport the movements of the human’s arm to the controller to control the humanoid arm by using sensors at each target joint to measure the angular displacement of it. To achieve this target, a kinematic analysis of the 5 DOF arm robot has been carried out including the forward, and solving the inverse kinematics. In addition, heterogeneous teleoperation based on forward and inverse kinematic between the humanoid arm and the exoskeleton model has been performed. Also, an experimental set up has been arranged to include the sensors considered (angular displacement sensors), control unit, signal-processing boards, and the actuators (servo motors of the humanoid arm robots). The control experiments have been conducted based on PID control.
Keywords: Forward kinematic, inverse kinematic, teleoperation, humanoid robot
Cite this Article
Elsamanty M, Sayed M, Abdr Aboo S. Heterogeneous Teleoperation Model for Controlling 3D Printed Humanoid Robot Arm with 5 DOF using 3 DOF Exoskeleton. Journal of Control & Instrumentation. 2019; 10(2): 1–15p.
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
