RFID BASED PROTOTYPE DEVELOPMENT OF IMMOBILIZER FOR TWO WHEELER VEHICLE SECURITY
DOI:
https://doi.org/10.37591/joci.v1i1-2-3.3064Abstract
An immobilizer is an electronic device fitted to an automobile which prevents the engine from running unless
the vehicle has the proper access to it. The main use of this system is to protect the vehicle from being stealth
as it deactivates the engine. The immobilizer security system is mainly seen in four wheeler vehicles. The
same idea can be implemented for 2 wheeler vehicles which are in huge number in countries like India and
Japan, as the vehicles are being stolen very frequently. Early models of immobiliser used a static code in the
ignition key itself in place of a remote RFID tag, which was recognized by an RFID loop around the lock
barrel and checked against the vehicle's Engine Control Unit (ECU) for a match. If the code is
unrecognised, the ECU will not allow fuel to flow and ignition to take place. When the ECU determines that
the coded key is valid then the ECU activates the fuel-injection sequence. The aim of this paper is to develop
a prototype for immobilizing the vehicle with the help of RFID. The tag should be in the pocket of the vehicle
owner, when the tag comes into the EMF field which is surrounded around the bike. The ID present in the
tag has to be read by the reader and compare the id present in the controller. If the ID gets matched then the
ignition will turn on or else not. The owner will be having only one ID. In any case if some other tries to
start the bike by using other tag having different ID it will not work and the bike will not get started. This
unique feature of the prototype adds more security for two wheeler vehicles.
Key words: RFID, Immobilizer, UID, Vehicle Security,=
Downloads
Published
Issue
Section
License
Journal Title:
Title of the Paper:
Corresponding Author’s Information:
Name: Address:
E-mail:
Contact Number:
It is herein agreed that: The copyright to the above-listed unpublished and original article is transferred to STM Journals.
This copyright transfer covers the exclusive right to reproduce and distribute the contribution, including reprints, translations, photographic reproductions, microform, electronic form (offline, online), or any other reproductions of similar nature.
I/We declare that above manuscript is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
I/ We warrant(s) that his/her/their contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libelous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.
I/We will not publish his/her/their above said contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. I/We also agree to the authorship of the article in the following order: Author(s) Name Signature(s)
1. ________________
2. ________________
3. ________________
4. ________________
The author(s) agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal (comments if any to the editor can be added below).
